Assembly settings
Product range
Immediately available
Yes
yes
choose ...
Front
Front form
Rectangular
Rectangular
choose ...
Front bezel colour
Black
Black
choose ...
Front bezel material
Plastic
Plastic
choose ...
Front dimension
24 mm x 18 mm
24 mm x 18 mm
choose ...
Mounting
Design
Raised
Raised
choose ...
Mounting type
Panel mounting
Panel mounting
choose ...
Mounting cut-out
Ø 16 mm
Ø 16 mm
choose ...
Mechanical Characteristics
Terminal
Soldering terminal
Soldering terminal
choose ...
Ambient Condition
IP front protection
IP40
IP40
choose ...
Back
Buzzer, Series 51, 24 mm x 18 mm, Raised, Soldering terminal
- 51-810.005
- Terminal
Add Accessories & Tools
Your product:
Product range
- HMI function:
- Buzzer
- Series:
- Series 51
Front
- Front dimension:
- 24 mm x 18 mm
- Front form:
- Rectangular
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Mounting
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
Mechanical Characteristics
- Terminal:
- Soldering terminal
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Total weight:
- 0.011 kg
Acoustical Characteristics
- Tone frequency:
- 2.9 kHz
- Sound pressure:
- 88dB (A) ±8dB at a distance of 0.1m
Ambient Condition
- IP front protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
Other
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- Further information see Technical data
- Wiring diagrams:
Recommended Protection Circuit: If the buzzer is not indirectly protected against surge impulses via an EMC-compliant power supply unit, an additional protective measure is recommended. In this case, a bidirectional TVS diode should be inserted between the connecting wires as close as possible (< 10m) to the buzzer, as shown in the circuit diagram above.
A = Power supply
B = Continuous tone (when open) / Intermittent tone (when closed)
C = Volume control
Share and save this product
Download files
Add to Cart
Your product consists of the following 1 COMPONENTS:
Front
- Front dimension:
- 24 mm x 18 mm
- Front form:
- Rectangular
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Mounting
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
Electrical characteristics
- Operating Voltage and Current:
Typ. 10 VAC ... 55 VAC, 15 mA
Typ. 10 VAC ... 55 VAC, 25 mA
Typ. 10 VDC ... 75 VDC, 15 mA
Typ. 10 VDC ... 75 VDC, 25 mA
Mechanical Characteristics
- Terminal:
- Soldering terminal
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Weight:
- 0.011 kg
Acoustical Characteristics
- Tone frequency:
- 2.9 kHz
- Sound pressure:
- 88dB (A) ±8dB at a distance of 0.1m
Ambient Condition
- IP Protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
Certificate
- Approbations:
- DNV
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Other
- Short Description:
- Actuator, Ø 16 mm, 24 mm x 18 mm, Rectangular, Black, Plastic, Soldering terminal
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- Further information see Technical data
- Buzzer system:
- Electronic non-contacting buzzer with IC oscillator
- Wiring diagrams:
- Recommended Protection Circuit: If the buzzer is not indirectly protected against surge impulses via an EMC-compliant power supply unit, an additional protective measure is recommended. In this case, a bidirectional TVS diode should be inserted between the connecting wires as close as possible (< 10m) to the buzzer, as shown in the circuit diagram above.A = Power supply
B = Continuous tone (when open) / Intermittent tone (when closed)
C = Volume control - Component layouts:
- Mounting cut-outs:
- Dimension drawings:
Download files
Where to buy
Add to Cart