Your product:
Mounting
- Design:
- Flush
- Mounting type:
- Panel mounting
Operating-/Indication part
- Lens illumination:
- Illuminated
Electrical characteristics
- Switching voltage and switching current:
- 100 mA at 42 VAC/VDC
- Contacts:
- 2 NC
- Switching rating:
- 42 V @ 0,1 A
- Electric strength:
- 2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
Mechanical Characteristics
- Terminal:
- Universal terminal, 2 x 0.5 mm
- Contact material:
- Gold
- Switching action:
- Momentary
- Switching system:
- Low-level element
- Switching system:
- This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.Special features are the long life, extremely short rebound time and stable contact resistance.
- Mechanical lifetime:
- 5 Mil. cycles of operation
- Operating force:
- 1,8 … 3,5 N
- Operating Travel:
- 3 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Terminal details 1:
- The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
- Weight:
- 0.007 kg
Ambient Condition
- IP front protection:
- IP65, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
Certificate
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Other
- Short Description:
- Actuator, Illuminated, 2 NC, Momentary, Universal terminal, 2 x 0.5 mm, IP65, according to DIN EN 60529
- Housing colour:
- Black
- Wiring diagrams:
- Component layouts:
A = Universal terminal (rear side)
B = Plug-in terminal (rear side)
C = Anti twist device
D = Drilling plan- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Download files
Add to Cart