View alternatives
Assembly settings
Product range
Immediately available
No

no

choose ...
  • No
Front
Front form
Square

Square

choose ...
  • Round
  • Square
Front bezel colour
Grey

Grey

choose ...
  • Grey
  • Nature
Front bezel material
Plastic

Plastic

choose ...
  • Aluminium
  • Plastic
Front dimension
30 mm x 30 mm

30 mm x 30 mm

choose ...
  • 30 mm x 30 mm
  • Ø 29 mm
Mounting
Design
Raised

Raised

choose ...
  • Raised
Mounting type
Panel mounting

Panel mounting

choose ...
  • Panel mounting
Mounting cut-out
Ø 22 mm

Ø 22 mm

choose ...
  • Ø 22 mm
Operating-/Indication part
Lever shape
long

long

choose ...
  • long
  • short
Lever colour
Black

Black

choose ...
  • Black
Lever bar colour
translucent

translucent

choose ...
  • translucent
Illumination colour
Blue

Blue

choose ...
  • Blue
  • Green
  • Red
  • Red / Green
  • Red / Yellow
  • White
  • Yellow
Electrical characteristics
Contacts configuration
1 NC + 1 NO

1 NC + 1 NO

choose ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NO
Switching rating
500 V AC @ 10 A

500 V AC @ 10 A

choose ...
  • 250 V AC @ 6 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
Operating voltage kind of
V AC/DC

V AC/DC

choose ...
  • V AC
  • V AC/DC
  • V DC
Operating voltage
28 V

28 V

choose ...
  • 110 V
  • 12 V
  • 130 V
  • 230 V
  • 24 - 30 V
  • 24 V
  • 28 V
  • 48 V
  • 72 V
Mechanical Characteristics
Terminal
Screw terminal

Screw terminal

choose ...
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Screw terminal
Switching positions
3 positions

3 positions

choose ...
  • 3 positions
Switching system
Slow-make switching element

Slow-make switching element

choose ...
  • Slow-make switching element
  • Snap-action switching element
Contact material
Silver

Silver

choose ...
  • Gold
  • Palladium
  • Silver
Switching action
Momentary - Rest - Momentary

Momentary - Rest - Momentary

choose ...
  • Maintained - Rest - Maintained
  • Maintained - Rest - Momentary
  • Momentary - Rest - Maintained
  • Momentary - Rest - Momentary
Switching angle
42° left / 42° right

42° left / 42° right

choose ...
  • 42° left / 42° right
Ambient Condition
IP front protection
IP65

IP65

choose ...
  • IP65
Back
View detailed product overview
Selector Switch
https://www.eao.com/p/fff9d5be

Selector switch, Series 04, 3 positions, Raised, 1 NC + 1 NO, Screw terminal

  • 704.294.0I
  • 704.951.0
  • 10-2513.1146
  • 704.910.5-1

  • Front dimension
  • Lever shape
  • Front form
  • Switching action
  • Front bezel material
  • Front bezel colour
704.294.0I
  • Terminal
704.951.0
  • Illumination colour
  • Operating voltage
  • Operating voltage kind of
10-2513.1146
  • Terminal
  • Contact material
  • Switching system
  • Switching rating
  • Contacts configuration
704.910.5-1
Add Accessories & Tools
Add to compare
Add to Cart
Your product:
704.294.0I
704.951.0
10-2513.1146
704.910.5-1

704.294.0I~10-2513.1146~704.910.5-1~704.951.0

Selector switch, Series 04, 3 positions, Raised, 1 NC + 1 NO, Screw terminal

Product range
HMI function:
Selector switch
Series:
Series 04
Front
Front dimension:
30 mm x 30 mm
Front form:
Square
Front bezel colour:
Grey
Front bezel material:
Plastic
Mounting
Design:
Raised
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Operating-/Indication part
Lever colour:
Black
Lever bar colour:
translucent
Lever shape:
long
Illumination colour:
Blue
Electrical characteristics
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts configuration:
1 NC + 1 NO
Operating voltage:
28 V AC/DC +10%
Operation current:
13 mA ±15 %
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Lumi. Intensity:
590 mcd
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Mechanical Characteristics
Terminal:
Screw terminal
Contact material:
Silver
Switching action:
Momentary - Rest - Momentary
Switching system:
Slow-make switching element
Switching positions:
3 positions
Switching angle:
42° left / 42° right
Tightening torque:
Screw terminal 0.5 Nm
Total weight:
0.077 kg
Ambient Condition
IP front protection:
IP65
Operating temperature:
– 40 °C … + 55 °C
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Other
Housing material:
Plastic
max. number of switching elements:
3
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Wiring diagrams
Wiring diagrams
Share and save this product
Download files
Add to Cart
Your product consists of the following 4 COMPONENTS:
704.294.0I

704.294.0I

Actuator

Front
Front dimension:
30 mm x 30 mm
Front form:
Square
Front bezel colour:
Grey
Front bezel material:
Plastic
Mounting
Design:
Raised
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Operating-/Indication part
Lever colour:
Black
Lever bar colour:
translucent
Lever material:
plastic
Lever shape:
long
Electrical characteristics
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1
Mechanical Characteristics
Switching action:
Momentary - Rest - Momentary
Switching positions:
3 positions
Switching angle:
42° left / 42° right
Mechanical lifetime:
≤2.5 Mil. cycles of operation
Weight:
0.03 kg
Ambient Condition
IP Protection:
IP65 front side
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Actuator, Ø 22.5 mm, 30 mm x 30 mm, optional illuminative, Black, long, Square, Grey, Plastic, Momentary - Rest - Momentary
Hints:
Max. 3 switching elements can be clipped on
max. number of switching elements:
3
Switching positions:
Switching positions
Wiring diagrams:
Wiring diagrams
Mounting cut-outs:
Mounting cut-outs
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Dimension drawings:
Dimension drawings
A = Screw terminal
Download files
Where to buy
Add to Cart
704.951.0

704.951.0

Lamp block

Electrical characteristics
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1/DIN EN 60947-5-1
Mechanical Characteristics
Terminal:
Screw terminal
Switching positions:
3 positions
Tightening torque:
Screw terminal 0.5 Nm
Wire cross section:
Max. wire cross-section 2 mm x 2.5 mm²
Skinning wire 10 mm
Max. wire cross-section of stranded cable 2 x 1.5 mm²
use stranded wires only with wire end ferrules of 10 mm length
Only one polarity is allowed on each side when wiring.
Weight:
0.017 kg
Ambient Condition
IP Protection:
IP00
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 300 m/s², pulse width 11 ms (sinusoidal EN IEC 60068-2-27)
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Climate resistance:
Relative humidity, max. 95%, non-condensing
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Lamp block, Plastic, Screw terminal
Housing material:
Plastic
Hints:
When using the lamp block, the application guidelines must be observed.
Suitable for connection:
Screw terminal
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Download files
Where to buy
Add to Cart
10-2513.1146

10-2513.1146

Single-LED

Operating-/Indication part
Illumination colour:
Blue
Electrical characteristics
Operating voltage:
28 V AC/DC +10%
Operation current:
13 mA ±15 %
Lumi. Intensity:
590 mcd
Mechanical Characteristics
Weight:
0.002 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Single-LED, BA9s, Blue, 28 V AC/DC +10%
Kind of iIllumination:
Single-LED
Hints:
The specified 6 V DC, 24 V DC Bi-colour; 130 V AC, 130 V DC and 230 V AC versions are built with a protection diode
The specified 12, 24, 28, 48 VAC/DC versions are built with a bridge rectifier
The specified 130 VAC types are developed to run on a supply voltage of 130 VAC only
An operation at a higher supply voltage using commercial lampholders with integrated resistors, is not approved
If the 24VDC Bi-colour lamp is driven with normal polarity (plus on middle contact of the lamp) the first mentioned colour will light up, with inverted polarity the second colour will ligth up
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = (standard)
B = (super bright)
Download files
Where to buy
Add to Cart
704.910.5-1

704.910.5-1

Switching element - New Version

Electrical characteristics
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts:
1 NC / 1 NO
Rated impulse withstand voltage Uimp:
4 kV
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

110 VDC

Current

5 mA

2 mA

Hard silver contacts

Voltage

24 VDC

110 VDC

Current

50 mA

10 mA
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN IEC UL 60947-5-1
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Mechanical Characteristics
Terminal:
Screw terminal
Contact material:
Silver
Switching system:
Slow-make switching element
Switching system:
The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Tightening torque:
Screw terminal 0.8 Nm
Wire cross section:
Wire cross-section 0.75 ... 2.5 mm² / AWG 18 to AWG 14
Skinning wire 10 mm
Max. number of wires: 2
Wire cross-section of stranded cable 0.5 ... 1.5 mm² / AWG 24 to AWG 18
use stranded wires only with wire end ferrules of 10 mm length
Max. number of stranded cables: 2
Only one polarity is allowed on each side when wiring.
Weight:
0.028 kg
Ambient Condition
IP Protection:
IP20
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
(single impacts, semi-sinusoidal) 300 m/s², pulse width 18 ms, as per DIN EN 60068-2-27
Vibration resistance:
(sinusförmig) 100 m/s² bei 10 Hz…500 Hz, nach DIN EN 60068-2-6, Erhöhtes Breitbandrauschen nach DIN EN 61373, Klasse 1B
Climate resistance:
Relative humidity 10 %rh ... 95 %rh (non-condensing) original packaging according to DIN EN IEC 60721-3-1 Class 1C1
Certificate
Approbations:
CB (IEC 60947-5-1), cULus, DNV, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Switching element - New Version, Slow-make switching element, 500 V AC @ 10 A, Silver, 1 NC / 1 NO, Screw terminal
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
A suitable enclosure is required for applications with increased protection requirements. In North America, the product must be installed in an enclosure in accordance with UL 50E Type 2 or higher.
Special requirements:

Special requirements for positive-opening auxiliary current switches

Positive opening travel

Emergency stop 12.5 mm

Minimum force

Emergency stop 50 N (actuating force at

which is safely switched)

Max. travel

Emergency stop 12.5 mm
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Download files
Where to buy
Add to Cart
Cookie consent
Our website uses cookies. For more information about cookies on this website, please see our Privacy Policy and learn more about us in the Legal Notice. You may change the setting in the Privacy Policy.
Accept all
Reject non-required
Manage Settings