View catalog
Assembly settings
Front
Colour
Colourless

Colourless

choose ...
  • Black
  • Blue
  • Colourless
  • Green
  • Grey
  • Nature
  • Orange
  • Red
  • Silver
  • Traffic blue
  • White
  • Yellow
Ambient Condition
IP front protection
IP65, IP67

IP65, IP67

choose ...
  • IP20
  • IP20 / IP66 with cap closed (IEC-EN60529)
  • IP40
  • IP44
  • IP65
  • IP65, IP66
  • IP65, IP66, IP67, according to DIN EN 60529
  • IP65, IP67
  • IP65, according to DIN EN 60529
  • IP66
  • IP66, IP67, IP69K
  • IP67
  • IP67 (ISO 20653)
  • IP67, according to DIN EN 60529
  • IP67, according to IEC 60529
  • IP69K
Other
Optics
transparent

transparent

choose ...
  • opaque
  • translucent
  • transparent
Material
Silicone

Silicone

choose ...
  • Aluminium
  • Brass
  • Metal
  • Metal / plastic
  • Plastic
  • Plastic, according to UL 94 V0
  • Plastic, heat-resistant and self-extinguishing
  • Pvc
  • Silicone
  • Stainless steel
  • Steel plate
Titel Accessory
Front protective cap

Front protective cap

choose ...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Electronic module
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Protective shroud, 6PB
  • Protective shroud, 8PB
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Symbol 0000 - blank
  • Symbol 0027 - Cooling; air conditioning
  • Symbol 0083 - Low beam; dipped beam
  • Symbol 0084 - Turn signals
  • Symbol 0085 - Hazard warning
  • Symbol 0086 - Windscreen wiper; windshield wiper
  • Symbol 0087 - Windscreen washer and wiper
  • Symbol 0097 - Rear window wiper
  • Symbol 0238 - Parking brake
  • Symbol 0244 - Horn
  • Symbol 0251 - Functional arrow; group select
  • Symbol 0635A - Windscreen demisting and defrosting
  • Symbol 0636A - Rear window demisting and defrosting
  • Symbol 0637A - Interior heating; heater
  • Symbol 0649A - Heated seat
  • Symbol 0651A - Horizontal return with line spacing
  • Symbol 0717 - Call for maintenance
  • Symbol 1141A - Identification light; beacon
  • Symbol 1204 - Flood light; working light
  • Symbol 1421A - Interior compartment illumination; interior (dome) light
  • Symbol 2025 - Scrolling
  • Symbol 2026 - Help
  • Symbol 2037 - Backspace
  • Terminal cover
  • Terminal marking - New Version
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Wall mounting kit
Back
View detailed product overview
https://www.eao.com/component/82-911.1/en/fro...

Front protective cap

  • 82-911.1

82-911.1 Front protective cap, Ø 19 mm, Silicone, transparent, Colourless
82-911.1
Add to Cart
Your product:
82-911.1

82-911.1

Front protective cap

Front
Colour:
Colourless
Mechanical Characteristics
Weight:
0.002 kg
Ambient Condition
IP front protection:
IP65, IP67
Other
Short Description:
Front protective cap, Ø 19 mm, Silicone, transparent, Colourless
Titel Accessory:
Front protective cap
Dimension:
Ø 19 mm
Material:
Silicone
Product attributes:
For button Ø 19 mm
Hints:
Suitable for indicator, push button and illuminated push button with flush design and lens flat/level with front ring
The exterior flush seal must be removed before mounting the protective cap
Up to 300 000 actuations possible
Optics:
transparent
Download files
Add to Cart
Cookie consent
Our website uses cookies. For more information about cookies on this website, please see our Privacy Policy and learn more about us in the Legal Notice. You may change the setting in the Privacy Policy.
Accept all
Reject non-required
Manage Settings