View alternatives
Assembly settings
Product range
Immediately available
No

no

choose ...
  • No
  • Yes
Front
Front form
Square

Square

choose ...
  • Rectangular
  • Round
  • Square
Front bezel colour
Black

Black

choose ...
  • Black
Front bezel material
Plastic

Plastic

choose ...
  • Plastic
Front dimension
18 mm x 18 mm

18 mm x 18 mm

choose ...
  • 18 mm x 18 mm
  • 24 mm x 18 mm
  • Ø 18 mm
Mounting
Design
Raised

Raised

choose ...
  • Raised
Mounting type
Panel mounting

Panel mounting

choose ...
  • Panel mounting
Mounting cut-out
Ø 16 mm

Ø 16 mm

choose ...
  • Ø 16 mm
Operating-/Indication part
Lens shape
Flush

Flush

choose ...
  • Concave
  • Flush
Lens colour
Colourless

Colourless

choose ...
  • Black
  • Blue
  • Colourless
  • Green
  • Grey
  • Orange
  • Red
  • Smokey black
  • White
  • Yellow
Lens material
Plastic

Plastic

choose ...
  • Plastic
Lens illumination
Illuminated

Illuminated

choose ...
  • Illuminated
  • Non illuminated
Illumination colour
Yellow

Yellow

choose ...
  • Blue
  • Green
  • Red
  • Red / Green
  • White
  • Yellow
Electrical characteristics
Contacts configuration
1 NO

1 NO

choose ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NC + 2 NO
  • 2 NO
  • 3 NC + 3 NO
  • 4 NC + 4 NO
Switching rating
42 V @ 0,1 A

42 V @ 0,1 A

choose ...
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 42 V @ 0,1 A
Operating voltage kind of
V AC/DC

V AC/DC

choose ...
  • V AC/DC
  • V DC
Operating voltage
24 V

24 V

choose ...
  • 12 V
  • 24 V
  • 28 V
Mechanical Characteristics
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

choose ...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

choose ...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

choose ...
  • Gold
Switching action
Momentary

Momentary

choose ...
  • Maintained
  • Momentary
Ambient Condition
IP front protection
IP40

IP40

choose ...
  • IP40
Back
View detailed product overview
Push button
https://www.eao.com/p/ff99ffcb

Illuminated push button, Series 31, 18 mm x 18 mm, illuminative, Raised, 1 NO, Gold, IP40, Universal terminal, 2 x 0.5 mm

  • 31-955.7
  • 31-455.036
  • 10-2J12.1064

  • Front form
  • Lens colour
  • Lens shape
  • Lens illumination
31-955.7
  • Switching rating
  • Front dimension
  • Switching system
  • Front form
  • Lens illumination
  • Terminal
  • Switching action
  • Contacts configuration
31-455.036
  • Operating voltage kind of
  • Illumination colour
  • Operating voltage
10-2J12.1064
Add Accessories & Tools
Add to compare
Add to Cart
Your product:
31-955.7
31-455.036
10-2J12.1064

31-955.7~10-2J12.1064~31-455.036

Illuminated push button, Series 31, 18 mm x 18 mm, illuminative, Raised, 1 NO, Gold, IP40, Universal terminal, 2 x 0.5 mm

Product range
Product Status:
Not Recommended for new design
HMI function:
Illuminated push button
Series:
Series 31
Front
Front dimension:
18 mm x 18 mm
Front form:
Square
Front bezel colour:
Black
Front bezel material:
Plastic
Mounting
Design:
Raised
Mounting cut-out:
Ø 16 mm
Mounting type:
Panel mounting
Operating-/Indication part
Lens colour:
Colourless
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Illumination colour:
Yellow
Electrical characteristics
Switching voltage and switching current:

100 mA at 42 VAC/VDC
Contacts configuration:
1 NO
Operating voltage:
24 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Switching rating:
42 V @ 0,1 A
Lumi. Intensity:
280 mcd
Mechanical Characteristics
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Tightening torque:
Fixing nut max. 0.5 Nm
Total weight:
0.008 kg
Ambient Condition
IP front protection:
IP40
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Vibration resistance:
10 g at 10 Hz…2000 Hz, amplitude 1.5 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
Other
Housing colour:
Black
Product attributes:
Not recommended for film insert
max. number of switching elements:
1
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Share and save this product
Download files
Add to Cart
Your product consists of the following 3 COMPONENTS:
31-955.7

31-955.7

Lens

Product range
Product Status:
Not Recommended for new design
Front
Front form:
Square
Operating-/Indication part
Lens colour:
Colourless
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Mechanical Characteristics
Weight:
0.001 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Lens, 15.3 mm x 15.3 mm, Illuminated, Colourless, Flush, Plastic
Dimension:
15.3 mm x 15.3 mm
Product attributes:
Not recommended for film insert
Download files
Where to buy
Add to Cart
31-455.036

31-455.036

Actuator

Product range
Product Status:
Not Recommended for new design
Front
Front dimension:
18 mm x 18 mm
Front form:
Square
Front bezel colour:
Black
Front bezel material:
Plastic
Mounting
Design:
Raised
Mounting cut-out:
Ø 16 mm
Mounting type:
Panel mounting
Operating-/Indication part
Lens illumination:
Illuminated
Electrical characteristics
Switching voltage and switching current:

100 mA at 42 VAC/VDC
Contacts:
1 NO
Switching rating:
42 V @ 0,1 A
Electric strength:
2500 VAC, 50 Hz, 1 minute, as per IEC 60512-2-11 between all terminals and earth
Protection class:
ll
Standards:
According to EN/IEC 61058-1
Mechanical Characteristics
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Mechanical lifetime:
5 Mil. cycles of operation
Operating force:
3 N … 3.5 N
Operating Travel:
ca. 3 mm
Tightening torque:
Fixing nut max. 0.5 Nm
Wire cross section:
Max. wire diameter 2 wires à 0.8 mm
Max. wire cross-section of stranded cable 1 x 0.75 mm²
Weight:
0.006 kg
Ambient Condition
IP Protection:
IP40 front side, IP67 with front protective cap
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
15 g for 11 ms, as per IEC 60512-4-3, IEC 60068-2-27 (Single impacts, semi-sinusoidal)
Vibration resistance:
10 g at 10 Hz…2000 Hz, amplitude 1.5 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
Climate resistance:
Standard condition according to IEC 60068-2-3
Changing condition according to IEC 60068-2-14
Certificate
Conformities:
CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Actuator, Ø 16 mm, 18 mm x 18 mm, Illuminated, Square, Black, Plastic, 1 NO, Momentary, Universal terminal, 2 x 0.5 mm
Internal size:
15,3 mm x 15,3 mm
Housing colour:
Black
max. number of switching elements:
1
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Terminals (rear side)
B = Diode block
C = Anti twist device only 18 mm x 24 mm
D = Drilling plan (component side)
Mounting cut-outs:
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Download files
Where to buy
Add to Cart
10-2J12.1064

10-2J12.1064

Single-LED

Operating-/Indication part
Illumination colour:
Yellow
Electrical characteristics
Operating voltage:
24 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Lumi. Intensity:
280 mcd
Mechanical Characteristics
Weight:
0.001 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Single-LED, T1 ¾ MG, Yellow, 24 V AC/DC +10%
Kind of iIllumination:
Single-LED
Hints:
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
Keep to the country specific safety instructions
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Download files
Where to buy
Add to Cart
Cookie consent
Our website uses cookies. For more information about cookies on this website, please see our Privacy Policy and learn more about us in the Legal Notice. You may change the setting in the Privacy Policy.
Accept all
Reject non-required
Manage Settings