View alternatives
Assembly settings
Product range
Immediately available
No

no

choose ...
  • No
Front
Front form
Round

Round

choose ...
  • Round
Front bezel colour
Black

Black

choose ...
  • Black
  • Nature
Front bezel material
Aluminium

Aluminium

choose ...
  • Aluminium
  • Plastic, according to UL 94 V0
Front dimension
Ø 25 mm

Ø 25 mm

choose ...
  • Ø 25 mm
Mounting
Design
Flush

Flush

choose ...
  • Flush
Mounting type
Panel mounting

Panel mounting

choose ...
  • Panel mounting
Mounting cut-out
Ø 22 mm

Ø 22 mm

choose ...
  • Ø 22 mm
Operating-/Indication part
Lens shape
Flush

Flush

choose ...
  • Flush
Lens colour
Black

Black

choose ...
  • Black
  • Blue
  • Colourless
  • Green
  • Nature
  • Orange
  • Red
  • Smokey black
  • Yellow
Lens material
Aluminium

Aluminium

choose ...
  • Aluminium
  • Plastic
  • Plastic, according to UL 94 HB
Lens illumination
Illuminated

Illuminated

choose ...
  • Illuminated
Shape of illumination
Dot

Dot

choose ...
  • Dot
  • Front
  • Ring
  • Symbol
Illumination colour
White

White

choose ...
  • Blue
  • Green
  • Red
  • Red / Green
  • White
  • Yellow
Electrical characteristics
Contacts configuration
2 NO

2 NO

choose ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NC + 2 NO
  • 2 NO
  • 3 NC + 3 NO
  • 4 NC + 4 NO
Switching rating
42 V @ 0,1 A

42 V @ 0,1 A

choose ...
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 42 V @ 0,1 A
Operating voltage kind of
V AC/DC

V AC/DC

choose ...
  • V AC/DC
  • V DC
Operating voltage
24 V

24 V

choose ...
  • 12 V
  • 24 V
  • 28 V
Mechanical Characteristics
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

choose ...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

choose ...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

choose ...
  • Gold
Switching action
Maintained

Maintained

choose ...
  • Maintained
  • Momentary
Ambient Condition
IP front protection
IP65

IP65

choose ...
  • IP65
Back
View detailed product overview
Push button
https://www.eao.com/p/fff90adc

Illuminated push button, Series 51, Ø 25 mm, illuminative, Flush, 2 NO, Gold, IP65, Universal terminal, 2 x 0.5 mm

  • 61-9841.0A
  • 51-481.036F
  • 61-9933.1
  • 10-2J12.1069

  • Lens colour
  • Lens material
  • Shape of illumination
61-9841.0A
  • Switching action
  • Switching rating
  • Terminal
  • Switching system
  • Contacts configuration
51-481.036F
  • Front bezel colour
  • Front bezel material
61-9933.1
  • Operating voltage kind of
  • Illumination colour
  • Operating voltage
10-2J12.1069
Add Accessories & Tools
Add to compare
Add to Cart
Your product:
61-9841.0A
51-481.036F
61-9933.1
10-2J12.1069

61-9841.0A~10-2J12.1069~51-481.036F~61-9933.1

Illuminated push button, Series 51, Ø 25 mm, illuminative, Flush, 2 NO, Gold, IP65, Universal terminal, 2 x 0.5 mm

Product range
HMI function:
Illuminated push button
Series:
Series 51
Front
Front dimension:
Ø 25 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Mounting
Design:
Flush
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Operating-/Indication part
Lens colour:
Black
Lens material:
Aluminium
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
opaque
Illumination colour:
White
Shape of illumination:
Dot
Electrical characteristics
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts configuration:
2 NO
Operating voltage:
24 V AC/DC +10%
Operation current:
2,5 - 5 mA ±15 %
Switching rating:
42 V @ 0,1 A
Lumi. Intensity:
750 mcd
Mechanical Characteristics
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained
Switching system:
Low-level element
Tightening torque:
Fixing nut max. 0.5 Nm
Total weight:
0.014 kg
Ambient Condition
IP front protection:
IP65
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Other
Housing colour:
Black
Product attributes:
For indicator, push button, illuminated push button
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Share and save this product
Download files
Add to Cart
Your product consists of the following 4 COMPONENTS:
61-9841.0A

61-9841.0A

Lens

Front
Front form:
Round
Operating-/Indication part
Lens colour:
Black
Lens material:
Aluminium
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
opaque
Shape of illumination:
Dot
Mechanical Characteristics
Weight:
0.002 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Lens, Ø 19.7 mm, Illuminated, Black, Flush, Aluminium
Dimension:
Ø 19.7 mm
Hints:
The colour of anodised aluminium parts can vary due to technical production reasons
Download files
Where to buy
Add to Cart
51-481.036F

51-481.036F

Actuator

Mounting
Design:
Flush
Mounting type:
Panel mounting
Operating-/Indication part
Lens illumination:
Illuminated
Electrical characteristics
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts:
2 NO
Switching rating:
42 V @ 0,1 A
Electric strength:
2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
Mechanical Characteristics
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Mechanical lifetime:
1 Mil. cycles of operation (RCC/RPB)
Operating force:
1,8 … 3,5 N
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.5 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Weight:
0.007 kg
Ambient Condition
IP front protection:
IP65, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Actuator, Illuminated, 2 NO, Maintained, Universal terminal, 2 x 0.5 mm, IP65, according to DIN EN 60529
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Universal terminal (rear side)
B = Plug-in terminal (rear side)
C = Anti twist device
D = Drilling plan
Mounting cut-outs:
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Download files
Where to buy
Add to Cart
61-9933.1

61-9933.1

Front bezel set

Front
Front dimension:
Ø 25 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Mounting
Mounting cut-out:
Ø 22.5 mm
Mounting type:
Panel mounting
Mechanical Characteristics
Weight:
0.004 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Front bezel set, Ø 25 mm, Ø 19,7 mm, Black, Aluminium
Dimension:
Ø 25 mm
Internal size:
Ø 19,7 mm
Product attributes:
For indicator, push button, illuminated push button
Hints:
The colour of anodised aluminium parts can vary due to technical production reasons
Mounting cut-outs:
Mounting cut-outs
Download files
Where to buy
Add to Cart
10-2J12.1069

10-2J12.1069

Single-LED

Operating-/Indication part
Illumination colour:
White
Electrical characteristics
Operating voltage:
24 V AC/DC +10%
Operation current:
2,5 - 5 mA ±15 %
Lumi. Intensity:
750 mcd
Mechanical Characteristics
Weight:
0.001 kg
Certificate
REACH:
REACH compliant
RoHS:
RoHS compliant
Other
Short Description:
Single-LED, T1 ¾ MG, White, 24 V AC/DC +10%
Kind of iIllumination:
Single-LED
Hints:
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
Keep to the country specific safety instructions
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Download files
Where to buy
Add to Cart
Cookie consent
Our website uses cookies. For more information about cookies on this website, please see our Privacy Policy and learn more about us in the Legal Notice. You may change the setting in the Privacy Policy.
Accept all
Reject non-required
Manage Settings