Assembly settings
Product range
Immediately available
No
no
choose ...
Front
Front form
Round
Round
choose ...
Front bezel colour
Nature
Nature
choose ...
Front bezel material
Aluminium
Aluminium
choose ...
Mounting
Design
Raised
Raised
choose ...
Mounting type
Panel mounting
Panel mounting
choose ...
Mounting cut-out
Ø 22 mm
Ø 22 mm
choose ...
Operating-/Indication part
Lever shape
short
short
choose ...
Lever colour
Black
Black
choose ...
Electrical characteristics
Contacts configuration
2 NO
2 NO
choose ...
Switching rating
42 V @ 0,1 A
42 V @ 0,1 A
choose ...
Mechanical Characteristics
Terminal
Universal terminal, 2 x 0.5 mm
Universal terminal, 2 x 0.5 mm
choose ...
Switching positions
2 positions
2 positions
choose ...
Switching system
Low-level element
Low-level element
choose ...
Contact material
Gold
Gold
choose ...
Switching action
Rest - Momentary
Rest - Momentary
choose ...
Switching angle
42° right
42° right
choose ...
Ambient Condition
IP front protection
IP67
IP67
choose ...
Back
Selector switch 2 positions, Series 14, 2 positions, Raised, 2 NO, Universal terminal, 2 x 0.5 mm
- 14-515.0360
- Switching system
- Contact material
- Lever shape
- Switching action
- Switching angle
- Terminal
- Switching rating
- Contacts configuration
Add Accessories & Tools
Your product:
Product range
- HMI function:
- Selector switch
- Series:
- Series 14
Front
- Front form:
- Round
- Front bezel colour:
- Nature
- Front bezel material:
- Aluminium
Mounting
- Design:
- Raised
- Mounting cut-out:
- Ø 22.5 mm
- Mounting type:
- Panel mounting
Operating-/Indication part
- Lever colour:
- Black
- Lever shape:
- short
Electrical characteristics
- Switching voltage and switching current:
- 100 mA at 42 VAC/VDC
- Contacts configuration:
- 2 NO
- Switching rating:
- 42 V @ 0,1 A
Mechanical Characteristics
- Terminal:
- Universal terminal, 2 x 0.5 mm
- Contact material:
- Gold
- Switching action:
- Rest - Momentary
- Switching system:
- Low-level element
- Switching positions:
- 2 positions
- Switching angle:
- 42° right
- Tightening torque:
- Fixing nut max. 0.25 Nm
- Total weight:
- 0.025 kg
Ambient Condition
- IP front protection:
- IP67
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Other
- Wiring diagrams:
Share and save this product
Download files
Add to Cart
Your product consists of the following 1 COMPONENTS:
Front
- Front form:
- Round
- Front bezel colour:
- Nature
- Front bezel material:
- Aluminium
Mounting
- Mounting type:
- Panel mounting
Operating-/Indication part
- Lever colour:
- Black
- Lever material:
- plastic
- Lever shape:
- short
Electrical characteristics
- Switching voltage and switching current:
- 100 mA at 42 VAC/VDC
- Contacts:
- 2 NO
- Switching rating:
- 42 V @ 0,1 A
- Electric strength:
- 3000 VAC, 50 Hz, 1 min. between all terminals and earth, according to EN/IEC 61058-1
- Protection class:
- ll
Mechanical Characteristics
- Terminal:
- Universal terminal, 2 x 0.5 mm
- Contact material:
- Gold
- Switching action:
- Rest - Momentary
- Switching system:
- Low-level element
- Switching system:
- This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.Special features are the long life, extremely short rebound time and stable contact resistance.
- Switching positions:
- 2 positions
- Switching angle:
- 42° right
- Mechanical lifetime:
- 5 Mil. cycles of operation
- Operating force:
- 3 N … 4 N, depending on the number of switching elements
- Tightening torque:
- Fixing nut max. 0.25 Nm
- Terminal details 1:
- The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
- Wire cross section:
- Max. wire diameter 2 wires of 1 mmMax. wire cross-section of stranded cable 2 x 0.75 mm²
- Weight:
- 0.025 kg
Ambient Condition
- IP front protection:
- IP67, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- Max. 150 m / s², pulse width 11 ms, 3-axis, (semi-sinusoidal as per EN IEC 60068-2-27)
Certificate
- Conformities:
- 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Other
- Short Description:
- Actuator, non illuminative, Black, short, Round, Nature, Aluminium, anodised, 2 NO, Rest - Momentary, Universal terminal, 2 x 0.5 mm, IP67, according to DIN EN 60529
- Hints:
- The colour of anodised aluminium parts can vary due to technical production reasons
- Switching positions:
- Wiring diagrams:
- Component layouts:
A = Terminals (rear side)
B = Anti twist device
C = Diode block
D = Drilling plan (component side)- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Download files
Where to buy
Add to Cart