Assembly settings
Gamma di prodotti
Disponibilità online
Sì
yes
scegliere ...
Anteriore
Front form
Rectangular
Rectangular
scegliere ...
Front bezel colour
Black
Black
scegliere ...
Front bezel material
Plastic
Plastic
scegliere ...
Front dimension
24 mm x 18 mm
24 mm x 18 mm
scegliere ...
Montaggio
Design
Raised
Raised
scegliere ...
Mounting type
Panel mounting
Panel mounting
scegliere ...
Mounting cut-out
Ø 16 mm
Ø 16 mm
scegliere ...
Caratteristiche meccaniche
Terminal
Plug-in terminal, 2.8 x 0.5 mm
Plug-in terminal, 2.8 x 0.5 mm
scegliere ...
Condizioni ambientali
IP front protection
IP40
IP40
scegliere ...
Indietro
Buzzer, Series 51, 24 mm x 18 mm, Raised, Plug-in terminal, 2.8 x 0.5 mm
- 51-801.002
- Terminal
Aggiungere accessori e strumenti
Il vostro prodotto:
Gamma di prodotti
- HMI function:
- Buzzer
- Serie:
- Series 51
Anteriore
- Front dimension:
- 24 mm x 18 mm
- Front form:
- Rectangular
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Montaggio
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
Caratteristiche meccaniche
- Terminal:
- Plug-in terminal, 2.8 x 0.5 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Peso totale:
- 0.009 kg
Caratteristiche acustiche
- Tone frequency:
- 2.1 kHz
- Sound pressure:
- 88dB (A) ±8dB at a distance of 0.1m
Condizioni ambientali
- IP front protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
Di più
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- Further information see Technical data
- Wiring diagrams:
Recommended Protection Circuit: If the buzzer is not indirectly protected against surge impulses by an EMC-compliant power supply or if the cable length exceeds 30 m, additional protection measures are recommended. In this case, a bidirectional TVS diode should be installed between the connection wires as close to the buzzer as possible, as shown in the schematic above. To suppress conducted emissions, a ceramic capacitor of 3.3 µF / 50 V should additionally be connected at the buzzer terminals [a] and [b].
A = Continuous tone
B = Interval tone 2Hz
Salvare o raccomandare prodotti
Scarica i file
Aggiungi al carrello
Il prodotto è composto da quanto segue 1 COMPONENTS:
Anteriore
- Front dimension:
- 24 mm x 18 mm
- Front form:
- Rectangular
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Montaggio
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
Caratteristiche elettriche
- Operating Voltage and Current:
Typ. 10 VDC ... 26 VDC, ≤ 20mA
Caratteristiche meccaniche
- Terminal:
- Plug-in terminal, 2.8 x 0.5 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Weight:
- 0.009 kg
Caratteristiche acustiche
- Tone frequency:
- 2.1 kHz
- Sound pressure:
- 88dB (A) ±8dB at a distance of 0.1m
Condizioni ambientali
- IP Protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
Certificati
- Approbations:
- DNV
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Actuator, Ø 16 mm, 24 mm x 18 mm, Rectangular, Black, Plastic, Plug-in terminal, 2.8 x 0.5 mm
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- Further information see Technical data
- Buzzer system:
- Electronic non-contacting buzzer with IC oscillator
- Wiring diagrams:
- Recommended Protection Circuit: If the buzzer is not indirectly protected against surge impulses by an EMC-compliant power supply or if the cable length exceeds 30 m, additional protection measures are recommended. In this case, a bidirectional TVS diode should be installed between the connection wires as close to the buzzer as possible, as shown in the schematic above. To suppress conducted emissions, a ceramic capacitor of 3.3 µF / 50 V should additionally be connected at the buzzer terminals [a] and [b].A = Continuous tone
B = Interval tone 2Hz - Mounting cut-outs:
- Dimension drawings:
Scarica i file
Dove acquistare
Aggiungi al carrello