Il vostro prodotto:
Caratteristiche elettriche
- Standards:
- The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1/DIN EN 60947-5-1
Caratteristiche meccaniche
- Terminal:
- Screw terminal
- Switching positions:
- 2 positions
- Tightening torque:
- Screw terminal 0.5 Nm
- Wire cross section:
- Max. wire cross-section 2 mm x 2.5 mm²Skinning wire 10 mmMax. wire cross-section of stranded cable 2 x 1.5 mm²use stranded wires only with wire end ferrules of 10 mm lengthOnly one polarity is allowed on each side when wiring.
- Weight:
- 0.016 kg
Condizioni ambientali
- IP Protection:
- IP00
- Operating temperature:
- – 40 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- Max. 300 m/s², pulse width 11 ms (sinusoidal EN IEC 60068-2-27)
- Vibration resistance:
- Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
- Climate resistance:
- Relative humidity, max. 95%, non-condensing
Certificati
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Lamp block, Plastic, Screw terminal
- Housing material:
- Plastic
- Hints:
- When using the lamp block, the application guidelines must be observed.
- Wiring diagrams:
- Dimension drawings:
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Scarica i file
Aggiungi al carrello