Mostra il componente nel prodotto
Assembly settings
Caratteristiche elettriche
Contacts
2 NO

2 NO

scegliere ...
  • 1 C
  • 1 NC
  • 1 NC / 1 FS
  • 1 NC / 1 MC
  • 1 NC / 1 NO
  • 1 NC / 2 NO
  • 1 NO
  • 2 C
  • 2 NC
  • 2 NC / 1 NO
  • 2 NC / 2 NO
  • 2 NO
  • 3 NC
  • 3 NC / 3 NO
  • 3 NO
  • 4 NC / 4 NO
Switching rating
250 V AC/DC @ 5 A

250 V AC/DC @ 5 A

scegliere ...
  • 150 V AC/DC @ 3 A
  • 150 V AC/DC @ 5 A
  • 24 V DC @ 0,2 A
  • 240 V
  • 240 V @ 3 A
  • 240 V AC @ 3 A
  • 250 V
  • 250 V @ 10 A
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 250 V AC @ 1,5 A
  • 250 V AC @ 3 A
  • 250 V AC @ 6 A
  • 250 V AC/DC
  • 250 V AC/DC @ 5 A
  • 30 V DC @ 0,1 A
  • 35 V @ 3 A
  • 35 V AC/DC @ 0,5 A
  • 35 V AC/DC @ 0,6 A
  • 36 V AC/DC @ 0,6 A
  • 400 V @ 10 A
  • 42 V
  • 42 V @ 0,1 A
  • 42 V AC @ 0,1 A
  • 42 V AC/DC @ 0,1 A
  • 42 V DC @ 0,1 A
  • 440 V AC @ 10 A
  • 48 V DC @ 0,5 A
  • 5 A
  • 50 V @ 0,1 A
  • 50 V @ 0,8 A
  • 50 V AC/DC @ 0,2 A
  • 50 V AC/DC @ 0,3 A
  • 500 V @ 10 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
  • 600 V AC @ 1,2 A
Caratteristiche meccaniche
Terminal
Plug-in terminal, 2.8 x 0.5 mm

Plug-in terminal, 2.8 x 0.5 mm

scegliere ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching positions
2 positions

2 positions

scegliere ...
  • 10 positions
  • 11 positions
  • 12 positions
  • 2 positions
  • 3 positions
  • 4 positions
  • 5 positions
  • 6 positions
  • 7 positions
  • 8 positions
  • 9 positions
Switching system
Snap-action switching element

Snap-action switching element

scegliere ...
  • Capacitive
  • Low-level element
  • Short-travel element
  • Slow-make switching element
  • Snap-action switching element
Contact material
Gold

Gold

scegliere ...
  • Gold
  • Gold-plated silver
  • Palladium
  • Rhodium/Silver
  • Silver
Di più
Material
Plastic, according to UL 94 V0

Plastic, according to UL 94 V0

scegliere ...
  • Aluminium
  • Brass
  • Metal
  • Metal / plastic
  • Plastic
  • Plastic, according to UL 94 V0
  • Plastic, heat-resistant and self-extinguishing
  • Pvc
  • Silicone
  • Stainless steel
  • Steel plate
Indietro
Mostra una panoramica dettagliata del prodotto
https://www.eao.com/component/61-8420.22/it/s...

Switching element

  • 61-8420.22

61-8420.22 Switching element, Snap-action switching element, 250 V AC/DC @ 5 A, Gold, 2 NO, Plug-in terminal, 2.8 x 0.5 mm
61-8420.22
Aggiungi al carrello
Il vostro prodotto:
61-8420.22

61-8420.22

Switching element

Caratteristiche elettriche
Switching voltage and switching current:

Switch rating AC with silver contact or silver contact with gold

plating

Service category AC-15

according to EN IEC 60947-5-1

Voltage

125 VAC

250 VAC

Current

2.5 A

2 A

Switch rating DC with silver contact or silver contact with gold

plating

Service category DC-13

according to EN IEC 60947-5-1

Voltage

250 VDC

Current

0.15 A
Contacts:
2 NO
Rated Operational Voltage Ue:
250 VAC/DC according to EN IEC 60947-1
Rated impulse withstand voltage Uimp:
4 kV, according to EN/IEC 60947-5-1
Rated insulation voltage Ui:
320 VAC, according to EN / IEC 60947-5-1
Recommended minimum operational data:

Voltage

5 VAC/DC

Current

10 mA
Switching rating:
250 V AC/DC @ 5 A
Electrical lifetime:
≥50 000 cycles of operation at 250VAC, 2A, cosφ 0.95,
Electric strength:
2500 VAC, 50 Hz, 1 minute, as per DIN / IEC 60512-2 between all terminals and earth
Overvoltage category:
III, according to EN / IEC 60947-5-1
Pollution degree:
2, according to EN IEC 60947-1
Protection class:
II, according to EN / IEC 61058-1
Standards:
The switches comply with the “Standards for low-voltage switching devices” EN IEC 61058-1, EN IEC 60947-5-1
Thermal current Ith:
5 A
Caratteristiche meccaniche
Terminal:
Plug-in terminal, 2.8 x 0.5 mm
Contact material:
Gold
Switching system:
Snap-action switching element
Switching system:
Self-cleaning, double-break snap-action switching system with contact opening width 2mm x 0.5mm (switch with small contact opening width as per EN IEC 61058-1).
The switching elements are optionally equipped with the following switching functions: One to three normally open (NO) or normally closed (NC), or any combination of NO and NC plus connections for T1 3/4 LED or lamp.
The number of switching elements cannot exceed three. The switching elements provided for the 3-position switch actua tors are equipped with max. 2 NC or 2 NO or any combination. The number of switching elements cannot exceed two.
Switching positions:
2 positions
Wire cross section:
1 wire flexible: 0.5 … 0.75 mm²
1 wire super flexible: 0.5 mm²
1 wire rigid: 0.5 … 1.5 mm²
2 wires rigid: 0.75 mm²
2 wires flexible: 0.5 mm²
Weight:
0.006 kg
Condizioni ambientali
Operating temperature:
– 25 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 100 m / s², pulse width, 3-axis (sinusoidal EN IEC 60068-2-27)
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Climate resistance:
Damp heat, cyclic: 96 hours, + 25 °C/97 %, + 55 °C/93 % relative humidity, as per EN IEC 60068-2-30
Damp heat, steady: 56 days, + 40 °C/93 % relative humidity, according to EN IEC 60068-2-78
Rapid change of temperature: 100 cycles, – 40 °C … + 80 °C, as per EN / IEC 60068-2-14
Certificati
Approbations:
CB (IEC 61058-1), CQC, CSA, DNV, ENEC (EN 61058-1), UL, VDE
Conformities:
CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
Di più
Short Description:
Switching element, Snap-action switching element, 250 V AC/DC @ 5 A, Gold, 2 NO, Plug-in terminal, 2.8 x 0.5 mm
Material:
Plastic, according to UL 94 V0
Hints:
With lamp terminal
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
Scarica i file
Aggiungi al carrello
Informazioni sui Cookie
Il nostro sito web utilizza i cookie. Per ulteriori informazioni sui cookie utilizzati in questo sito web, consultare la nostra Informativa sulla Privacy e per saperne di più su di noi, consultare la Informazioni Corporate. È possibile modificare le impostazioni nella Informativa sulla Privacy.
Accetta tutti i cookie
Nega tutti i cookie
Gestisci impostazioni