Alternatieven tonen
Assembly settings
Assortiment
Online beschikbaarheid
Geen

no

kiezen...
  • Geen
Voor
Front form
Round

Round

kiezen...
  • Round
Front bezel type
With transparent silicone membrane

With transparent silicone membrane

kiezen...
  • Flush
  • With transparent silicone membrane
  • With transparent silicone membrane, resistant to sea water
Front bezel colour
Black

Black

kiezen...
  • Black
  • Nature
Front bezel material
Aluminium

Aluminium

kiezen...
  • Aluminium
  • Stainless steel
Front dimension
Ø 35 mm

Ø 35 mm

kiezen...
  • Ø 35 mm
Montage
Design
Flush

Flush

kiezen...
  • Flush
Mounting type
Panel mounting

Panel mounting

kiezen...
  • Panel mounting
Mounting cut-out
Ø 30 mm

Ø 30 mm

kiezen...
  • Ø 30 mm
Bedienings-/display-eenheid
Lens type
Level with front bezel

Level with front bezel

kiezen...
  • Level with front bezel
Lens shape
Flush

Flush

kiezen...
  • Flush
Lens colour
Colourless

Colourless

kiezen...
  • Black
  • Blue
  • Colourless
  • Gold
  • Green
  • Nature
  • Olive green
  • Red
  • Silver
  • Yellow
Lens material
Plastic

Plastic

kiezen...
  • Aluminium
  • Plastic
  • Stainless steel
Lens illumination
Illuminated

Illuminated

kiezen...
  • Illuminated
Shape of illumination
Front

Front

kiezen...
  • Dot
  • Front
Marking plate optics
translucent

translucent

kiezen...
  • translucent
  • transparent
Illumination colour
Red

Red

kiezen...
  • Blue
  • Green
  • Red
  • White
  • Yellow
Marking plate illumination
illuminative

illuminative

kiezen...
  • illuminative
  • ring illumination
Elektrische kenmerken
Configuratie van contacten
2 NO

2 NO

kiezen...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NC + 2 NO
  • 2 NO
  • 3 NC + 3 NO
  • 4 NC + 4 NO
Switching rating
42 V @ 0,1 A

42 V @ 0,1 A

kiezen...
  • 250 V @ 3 A
  • 42 V @ 0,1 A
Operating voltage kind of
V AC/DC

V AC/DC

kiezen...
  • V AC/DC
Operating voltage
24 V

24 V

kiezen...
  • 12 V
  • 24 V
  • 28 V
  • 48 V
Mechanische kenmerken
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

kiezen...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

kiezen...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

kiezen...
  • Gold
Switching action
Momentary

Momentary

kiezen...
  • Maintained
  • Momentary
Omgevingscondities
IP front protection
IP67

IP67

kiezen...
  • IP67
Terug
Toon gedetailleerd productoverzicht
Drukknop
https://www.eao.com/p/ffecbb46

Illuminated push button, Series 14, Ø 35 mm, illuminative, Flush, 2 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm

  • 704.602.7
  • 704.609.9
  • 14-431.036
  • 14-955.4
  • 10-2112.1062

  • Shape of illumination
  • Lens material
  • Lens colour
704.602.7
  • Marking plate illumination
  • Marking plate optics
  • Marking plate colour
704.609.9
  • Switching action
  • Terminal
  • Switching rating
  • Switching system
  • Configuratie van contacten
14-431.036
  • Front bezel material
  • Front bezel colour
  • Front bezel type
14-955.4
  • Operating voltage
  • Illumination colour
10-2112.1062
Accessoires & gereedschap toevoegen
Ter vergelijking toevoegen
Toevoegen aan winkelwagentje
Uw product:
704.602.7
704.609.9
14-431.036
14-955.4
10-2112.1062

704.602.7~10-2112.1062~14-431.036~14-955.4~704.609.9

Illuminated push button, Series 14, Ø 35 mm, illuminative, Flush, 2 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm

Assortiment
HMI function:
Illuminated push button
Series:
Series 14
Voor
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Front bezel type:
With transparent silicone membrane
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Bedienings-/display-eenheid
Lens colour:
Colourless
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Lens type:
Level with front bezel
Marking plate colour:
White
Marking plate optics:
translucent
Marking plate illumination:
illuminative
Illumination colour:
Red
Shape of illumination:
Front
Elektrische kenmerken
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Configuratie van contacten:
2 NO
Operating voltage:
24 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Switching rating:
42 V @ 0,1 A
Lumi. Intensity:
330 mcd
Mechanische kenmerken
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Tightening torque:
Fixing nut max. 0.25 Nm
Totaal gewicht:
0.033 kg
Omgevingscondities
IP front protection:
IP67
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Meer
Housing colour:
Black
Housing material:
Plastic
Product attributes:
With transparent silicone membrane
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Product opslaan of delen
Bestanden downloaden
Toevoegen aan winkelwagentje
Uw product bestaat uit het volgende 5 COMPONENTS:
704.602.7

704.602.7

Lens

Voor
Front form:
Round
Bedienings-/display-eenheid
Lens colour:
Colourless
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Lens type:
Level with front bezel
Shape of illumination:
Front
Mechanische kenmerken
Weight:
0.001 kg
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Lens, Ø 23.7 mm, Illuminated, Colourless, Flush, Plastic
Dimension:
Ø 23.7 mm
Hints:
To obtain IP67, use marking plate Part No. 704.609.9
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
704.609.9

704.609.9

Marking plate

Bedienings-/display-eenheid
Marking plate colour:
White
Marking plate optics:
translucent
Marking plate illumination:
illuminative
Mechanische kenmerken
Weight:
0 kg
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Marking plate, Ø 20 mm, illuminative, White, Plastic, translucent
Dimension:
Ø 20 mm
Hints:
for lens round flat
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
14-431.036

14-431.036

Actuator

Voor
Front form:
Round
Montage
Mounting type:
Panel mounting
Bedienings-/display-eenheid
Lens illumination:
Illuminated
Elektrische kenmerken
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts:
2 NO
Switching rating:
42 V @ 0,1 A
Electric strength:
3000 VAC, 50 Hz, 1 min. between all terminals and earth, according to EN/IEC 61058-1
Protection class:
ll
Mechanische kenmerken
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Mechanical lifetime:
5 Mil. cycles of operation
Operating force:
3 N … 4 N, depending on the number of switching elements
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.25 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Wire cross section:
Max. wire diameter 2 wires of 1 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
Weight:
0.016 kg
Omgevingscondities
IP front protection:
IP67, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 150 m / s², pulse width 11 ms, 3-axis, (semi-sinusoidal as per EN IEC 60068-2-27)
Certificaten
Conformities:
2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Actuator, Illuminated, Round, 2 NO, Momentary, Universal terminal, 2 x 0.5 mm, IP67, according to DIN EN 60529
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Terminals (rear side)
B = Anti twist device
C = Diode block
D = Drilling plan (component side)
Mounting cut-outs:
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
14-955.4

14-955.4

Front bezel

Voor
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Front bezel type:
With transparent silicone membrane
Montage
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Mechanische kenmerken
Weight:
0.015 kg
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Front bezel, Ø 35 mm, Black, Aluminium
Dimension:
Ø 35 mm
Housing colour:
Black
Housing material:
Plastic
Product attributes:
With transparent silicone membrane
Hints:
Front bezel to be mounted with a torque of 0.4 Nm onto actuator
Before assembling remove the flat gasket of the switch
The colour of anodised aluminium parts can vary due to technical production reasons
Mounting cut-outs:
Mounting cut-outs
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
10-2112.1062

10-2112.1062

Single-LED

Bedienings-/display-eenheid
Illumination colour:
Red
Elektrische kenmerken
Operating voltage:
24 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Lumi. Intensity:
330 mcd
Mechanische kenmerken
Weight:
0.001 kg
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Single-LED, T5.6, Red, 24 V AC/DC +10%
Hints:
For LED element fitting information see Application guidelines, LED polarity
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
Cookie toestemming
Onze website maakt gebruik van cookies. Voor meer informatie over cookies op deze website verwijzen wij u naar onze Privacybeleid en kunt u meer over ons lezen in de Legal Notice. U kunt de instellingen wijzigen in de Privacybeleid.
Accepteren
Afwijzen
Instellingen beheren