Montrer les alternatives
Assembly settings
Gamme de produits
Disponibilité en ligne
Non

no

choisir ...
  • Non
Front
Front form
Round

Round

choisir ...
  • Round
Front bezel type
With transparent silicone membrane

With transparent silicone membrane

choisir ...
  • Flush
  • With transparent silicone membrane
  • With transparent silicone membrane, resistant to sea water
Front bezel colour
Black

Black

choisir ...
  • Black
  • Nature
Front bezel material
Aluminium

Aluminium

choisir ...
  • Aluminium
  • Stainless steel
Front dimension
Ø 35 mm

Ø 35 mm

choisir ...
  • Ø 35 mm
Montage
Design
Flush

Flush

choisir ...
  • Flush
Mounting type
Panel mounting

Panel mounting

choisir ...
  • Panel mounting
Mounting cut-out
Ø 30 mm

Ø 30 mm

choisir ...
  • Ø 30 mm
Partie commande/affichage
Lens type
Level with front bezel

Level with front bezel

choisir ...
  • Level with front bezel
Lens shape
Flush

Flush

choisir ...
  • Flush
Lens colour
Colourless

Colourless

choisir ...
  • Black
  • Blue
  • Colourless
  • Gold
  • Green
  • Nature
  • Olive green
  • Red
  • Silver
  • Yellow
Lens material
Plastic

Plastic

choisir ...
  • Aluminium
  • Plastic
  • Stainless steel
Lens illumination
Illuminated

Illuminated

choisir ...
  • Illuminated
Shape of illumination
Front

Front

choisir ...
  • Dot
  • Front
Marking plate optics
translucent

translucent

choisir ...
  • translucent
  • transparent
Illumination colour
Red

Red

choisir ...
  • Blue
  • Green
  • Red
  • White
  • Yellow
Marking plate illumination
illuminative

illuminative

choisir ...
  • illuminative
  • ring illumination
Caractéristiques électriques
Contacts Configuration
2 NO

2 NO

choisir ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NC + 2 NO
  • 2 NO
  • 3 NC + 3 NO
  • 4 NC + 4 NO
Switching rating
42 V @ 0,1 A

42 V @ 0,1 A

choisir ...
  • 250 V @ 3 A
  • 42 V @ 0,1 A
Operating voltage kind of
V AC/DC

V AC/DC

choisir ...
  • V AC/DC
Operating voltage
24 V

24 V

choisir ...
  • 12 V
  • 24 V
  • 28 V
  • 48 V
Caractéristiques mécaniques
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

choisir ...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

choisir ...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

choisir ...
  • Gold
Switching action
Momentary

Momentary

choisir ...
  • Maintained
  • Momentary
Conditions environnementales
IP front protection
IP67

IP67

choisir ...
  • IP67
Retour
Afficher l'aperçu détaillé des produits
Bouton poussoir
https://www.eao.com/p/ffecbb46

Illuminated push button, Series 14, Ø 35 mm, illuminative, Flush, 2 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm

  • 704.602.7
  • 704.609.9
  • 14-431.036
  • 14-955.4
  • 10-2112.1062

  • Shape of illumination
  • Lens material
  • Lens colour
704.602.7
  • Marking plate illumination
  • Marking plate optics
  • Marking plate colour
704.609.9
  • Switching action
  • Terminal
  • Switching rating
  • Switching system
  • Contacts Configuration
14-431.036
  • Front bezel material
  • Front bezel colour
  • Front bezel type
14-955.4
  • Operating voltage
  • Illumination colour
10-2112.1062
Ajoute des accessoires & outilage
Ajouter à la comparaison
Ajouter au panier
Votre produit:
704.602.7
704.609.9
14-431.036
14-955.4
10-2112.1062

704.602.7~10-2112.1062~14-431.036~14-955.4~704.609.9

Illuminated push button, Series 14, Ø 35 mm, illuminative, Flush, 2 NO, Gold, IP67, Universal terminal, 2 x 0.5 mm

Gamme de produits
HMI function:
Illuminated push button
Séries:
Series 14
Front
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Front bezel type:
With transparent silicone membrane
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lens colour:
Colourless
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Lens type:
Level with front bezel
Marking plate colour:
White
Marking plate optics:
translucent
Marking plate illumination:
illuminative
Illumination colour:
Red
Shape of illumination:
Front
Caractéristiques électriques
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts Configuration:
2 NO
Operating voltage:
24 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Switching rating:
42 V @ 0,1 A
Lumi. Intensity:
330 mcd
Caractéristiques mécaniques
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Tightening torque:
Fixing nut max. 0.25 Nm
Poids total:
0.033 kg
Conditions environnementales
IP front protection:
IP67
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Autres
Housing colour:
Black
Housing material:
Plastic
Product attributes:
With transparent silicone membrane
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Enregistrer ou recommander un produit
Télécharger des fichiers
Ajouter au panier
Votre produit se compose des éléments suivants 5 COMPONENTS:
704.602.7

704.602.7

Lens

Front
Front form:
Round
Partie commande/affichage
Lens colour:
Colourless
Lens material:
Plastic
Lens illumination:
Illuminated
Lens shape:
Flush
Lens optics:
transparent
Lens type:
Level with front bezel
Shape of illumination:
Front
Caractéristiques mécaniques
Weight:
0.001 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Lens, Ø 23.7 mm, Illuminated, Colourless, Flush, Plastic
Dimension:
Ø 23.7 mm
Hints:
To obtain IP67, use marking plate Part No. 704.609.9
Télécharger des fichiers
Où acheter
Ajouter au panier
704.609.9

704.609.9

Marking plate

Partie commande/affichage
Marking plate colour:
White
Marking plate optics:
translucent
Marking plate illumination:
illuminative
Caractéristiques mécaniques
Weight:
0 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Marking plate, Ø 20 mm, illuminative, White, Plastic, translucent
Dimension:
Ø 20 mm
Hints:
for lens round flat
Télécharger des fichiers
Où acheter
Ajouter au panier
14-431.036

14-431.036

Actuator

Front
Front form:
Round
Montage
Mounting type:
Panel mounting
Partie commande/affichage
Lens illumination:
Illuminated
Caractéristiques électriques
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts:
2 NO
Switching rating:
42 V @ 0,1 A
Electric strength:
3000 VAC, 50 Hz, 1 min. between all terminals and earth, according to EN/IEC 61058-1
Protection class:
ll
Caractéristiques mécaniques
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Momentary
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Mechanical lifetime:
5 Mil. cycles of operation
Operating force:
3 N … 4 N, depending on the number of switching elements
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.25 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Wire cross section:
Max. wire diameter 2 wires of 1 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
Weight:
0.016 kg
Conditions environnementales
IP front protection:
IP67, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 150 m / s², pulse width 11 ms, 3-axis, (semi-sinusoidal as per EN IEC 60068-2-27)
Certificats
Conformities:
2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Actuator, Illuminated, Round, 2 NO, Momentary, Universal terminal, 2 x 0.5 mm, IP67, according to DIN EN 60529
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Terminals (rear side)
B = Anti twist device
C = Diode block
D = Drilling plan (component side)
Mounting cut-outs:
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Télécharger des fichiers
Où acheter
Ajouter au panier
14-955.4

14-955.4

Front bezel

Front
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Black
Front bezel material:
Aluminium
Front bezel type:
With transparent silicone membrane
Montage
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Caractéristiques mécaniques
Weight:
0.015 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Front bezel, Ø 35 mm, Black, Aluminium
Dimension:
Ø 35 mm
Housing colour:
Black
Housing material:
Plastic
Product attributes:
With transparent silicone membrane
Hints:
Front bezel to be mounted with a torque of 0.4 Nm onto actuator
Before assembling remove the flat gasket of the switch
The colour of anodised aluminium parts can vary due to technical production reasons
Mounting cut-outs:
Mounting cut-outs
Télécharger des fichiers
Où acheter
Ajouter au panier
10-2112.1062

10-2112.1062

Single-LED

Partie commande/affichage
Illumination colour:
Red
Caractéristiques électriques
Operating voltage:
24 V AC/DC +10%
Operation current:
7 - 14 mA ±15 %
Lumi. Intensity:
330 mcd
Caractéristiques mécaniques
Weight:
0.001 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Single-LED, T5.6, Red, 24 V AC/DC +10%
Hints:
For LED element fitting information see Application guidelines, LED polarity
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Télécharger des fichiers
Où acheter
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres