Alternatieven tonen
Assembly settings
Assortiment
Online beschikbaarheid
Geen

no

kiezen...
  • Geen
Voor
Front form
Round

Round

kiezen...
  • Round
  • Square
Front bezel colour
Nature

Nature

kiezen...
  • Black
  • Nature
  • Silver
Front bezel material
Aluminium

Aluminium

kiezen...
  • Aluminium
  • Plastic
Front dimension
Ø 35 mm

Ø 35 mm

kiezen...
  • 35 mm x 35 mm
  • Ø 35 mm
Montage
Design
Flush

Flush

kiezen...
  • Flush
Mounting type
Panel mounting

Panel mounting

kiezen...
  • Panel mounting
Mounting cut-out
Ø 30 mm

Ø 30 mm

kiezen...
  • 30 mm x 30 mm
  • Ø 30 mm
Bedienings-/display-eenheid
Lever shape
short

short

kiezen...
  • long
  • short
Lever colour
Black

Black

kiezen...
  • Black
Lever bar colour
translucent

translucent

kiezen...
  • translucent
Illumination colour
White

White

kiezen...
  • Blue
  • Green
  • Red
  • Red / Green
  • Red / Yellow
  • White
  • Yellow
Elektrische kenmerken
Configuratie van contacten
1 NO

1 NO

kiezen...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NO
Switching rating
500 V AC @ 10 A

500 V AC @ 10 A

kiezen...
  • 250 V AC @ 6 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
Operating voltage kind of
V AC/DC

V AC/DC

kiezen...
  • V AC
  • V AC/DC
  • V DC
Operating voltage
110 V

110 V

kiezen...
  • 110 V
  • 12 V
  • 130 V
  • 230 V
  • 24 - 30 V
  • 24 V
  • 28 V
  • 48 V
  • 72 V
Mechanische kenmerken
Terminal
Screw terminal

Screw terminal

kiezen...
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Screw terminal
Switching positions
3 positions

3 positions

kiezen...
  • 3 positions
Switching system
Slow-make switching element

Slow-make switching element

kiezen...
  • Slow-make switching element
  • Snap-action switching element
Contact material
Gold

Gold

kiezen...
  • Gold
  • Palladium
  • Silver
Switching action
Momentary - Rest - Momentary

Momentary - Rest - Momentary

kiezen...
  • Maintained - Rest - Maintained
  • Maintained - Rest - Momentary
  • Momentary - Rest - Maintained
  • Momentary - Rest - Momentary
Switching angle
42° left / 42° right

42° left / 42° right

kiezen...
  • 42° left / 42° right
Omgevingscondities
IP front protection
IP65

IP65

kiezen...
  • IP65
Terug
Toon gedetailleerd productoverzicht
Keuzeschakelaar
https://www.eao.com/p/fd611e81

Selector switch, Series 04, 3 positions, Flush, 1 NO, Screw terminal

  • 704.405.018I
  • 704.951.0
  • 10-4H22.1039P
  • 704.911.1-1

  • Switching action
  • Front bezel material
  • Mounting cut-out
  • Front form
  • Front dimension
  • Lever shape
  • Front bezel colour
704.405.018I
  • Terminal
704.951.0
  • Operating voltage kind of
  • Operating voltage
  • Illumination colour
10-4H22.1039P
  • Switching rating
  • Contact material
  • Switching system
  • Configuratie van contacten
704.911.1-1
Accessoires & gereedschap toevoegen
Ter vergelijking toevoegen
Toevoegen aan winkelwagentje
Uw product:
704.405.018I
704.951.0
10-4H22.1039P
704.911.1-1

704.405.018I~10-4H22.1039P~704.911.1-1~704.951.0

Selector switch, Series 04, 3 positions, Flush, 1 NO, Screw terminal

Assortiment
HMI function:
Selector switch
Series:
Series 04
Voor
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Bedienings-/display-eenheid
Lever colour:
Black
Lever bar colour:
translucent
Lever shape:
short
Illumination colour:
White
Elektrische kenmerken
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Configuratie van contacten:
1 NO
Operating voltage:
110 V AC/DC
Operation current:
2 mA -30%/+25%
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Lumi. Intensity:
4 x 446 mcd
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Mechanische kenmerken
Terminal:
Screw terminal
Contact material:
Gold
Switching action:
Momentary - Rest - Momentary
Switching system:
Slow-make switching element
Switching positions:
3 positions
Switching angle:
42° left / 42° right
Tightening torque:
Screw terminal 0.5 Nm
Totaal gewicht:
0.089 kg
Omgevingscondities
IP front protection:
IP65
Operating temperature:
– 40 °C … + 55 °C
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Meer
Housing material:
Plastic
max. number of switching elements:
3
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Wiring diagrams
Wiring diagrams
Product opslaan of delen
Bestanden downloaden
Toevoegen aan winkelwagentje
Uw product bestaat uit het volgende 4 COMPONENTS:
704.405.018I

704.405.018I

Actuator

Voor
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Bedienings-/display-eenheid
Lever colour:
Black
Lever bar colour:
translucent
Lever material:
plastic
Lever shape:
short
Elektrische kenmerken
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1
Mechanische kenmerken
Switching action:
Momentary - Rest - Momentary
Switching positions:
3 positions
Switching angle:
42° left / 42° right
Mechanical lifetime:
≤2.5 Mil. cycles of operation
Weight:
0.05 kg
Omgevingscondities
IP Protection:
IP65 front side
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Actuator, Ø 30.5 mm, Ø 35 mm, optional illuminative, Black, short, Round, Nature, Aluminium, anodised, Momentary - Rest - Momentary
Hints:
Max. 3 switching elements can be clipped on
max. number of switching elements:
3
Switching positions:
Switching positions
Wiring diagrams:
Wiring diagrams
Mounting cut-outs:
Mounting cut-outs
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Dimension drawings:
Dimension drawings
X = Screw terminal
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
704.951.0

704.951.0

Lamp block

Elektrische kenmerken
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1/DIN EN 60947-5-1
Mechanische kenmerken
Terminal:
Screw terminal
Switching positions:
3 positions
Tightening torque:
Screw terminal 0.5 Nm
Wire cross section:
Max. wire cross-section 2 mm x 2.5 mm²
Skinning wire 10 mm
Max. wire cross-section of stranded cable 2 x 1.5 mm²
use stranded wires only with wire end ferrules of 10 mm length
Only one polarity is allowed on each side when wiring.
Weight:
0.017 kg
Omgevingscondities
IP Protection:
IP00
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 300 m/s², pulse width 11 ms (sinusoidal EN IEC 60068-2-27)
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Climate resistance:
Relative humidity, max. 95%, non-condensing
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Lamp block, Plastic, Screw terminal
Housing material:
Plastic
Hints:
When using the lamp block, the application guidelines must be observed.
Suitable for connection:
Screw terminal
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
10-4H22.1039P

10-4H22.1039P

Single-LED

Bedienings-/display-eenheid
Illumination colour:
White
Elektrische kenmerken
Operating voltage:
110 V AC/DC
Operation current:
2 mA -30%/+25%
Lumi. Intensity:
4 x 446 mcd
Mechanische kenmerken
Weight:
0.002 kg
Certificaten
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Single-LED, BA9s, White, 110 V AC/DC
Kind of iIllumination:
Multi-LED EN 50155
Hints:
A suitable LED remover Part No. 700.006.0
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified 72 and 110 VAC/VDC versions are built with a bridge rectifier
The specified 72 and 110 VAC/VDC versions are built with a protection diode
In case one LED fails, the other pair of still functioning LED›s is working. The light output then is half in order to indicate the malfunction and shows this way the need for replacement
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
704.911.1-1

704.911.1-1

Switching element - New Version

Elektrische kenmerken
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts:
1 NO
Rated impulse withstand voltage Uimp:
4 kV
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

110 VDC

Current

5 mA

2 mA

Hard silver contacts

Voltage

24 VDC

110 VDC

Current

50 mA

10 mA
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN IEC UL 60947-5-1
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Mechanische kenmerken
Terminal:
Screw terminal
Contact material:
Gold
Switching system:
Slow-make switching element
Switching system:
The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Tightening torque:
Screw terminal 0.8 Nm
Wire cross section:
Wire cross-section 0.75 ... 2.5 mm² / AWG 18 to AWG 14
Skinning wire 10 mm
Max. number of wires: 2
Wire cross-section of stranded cable 0.5 ... 1.5 mm² / AWG 24 to AWG 18
use stranded wires only with wire end ferrules of 10 mm length
Max. number of stranded cables: 2
Only one polarity is allowed on each side when wiring.
Weight:
0.02 kg
Omgevingscondities
IP Protection:
IP20
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
(single impacts, semi-sinusoidal) 300 m/s², pulse width 18 ms, as per DIN EN 60068-2-27
Vibration resistance:
(sinusförmig) 100 m/s² bei 10 Hz…500 Hz, nach DIN EN 60068-2-6, Erhöhtes Breitbandrauschen nach DIN EN 61373, Klasse 1B
Climate resistance:
Relative humidity 10 %rh ... 95 %rh (non-condensing) original packaging according to DIN EN IEC 60721-3-1 Class 1C1
Certificaten
Approbations:
CB (IEC 60947-5-1), cULus, DNV, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
Meer
Short Description:
Switching element - New Version, Slow-make switching element, 500 V AC @ 10 A, Gold, 1 NO, Screw terminal
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
A suitable enclosure is required for applications with increased protection requirements. In North America, the product must be installed in an enclosure in accordance with UL 50E Type 2 or higher.
Special requirements:

Special requirements for positive-opening auxiliary current switches

Positive opening travel

Emergency stop 12.5 mm

Minimum force

Emergency stop 50 N (actuating force at

which is safely switched)

Max. travel

Emergency stop 12.5 mm
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Bestanden downloaden
Waar te koop
Toevoegen aan winkelwagentje
Cookie toestemming
Onze website maakt gebruik van cookies. Voor meer informatie over cookies op deze website verwijzen wij u naar onze Privacybeleid en kunt u meer over ons lezen in de Legal Notice. U kunt de instellingen wijzigen in de Privacybeleid.
Accepteren
Afwijzen
Instellingen beheren