Montrer les alternatives
Assembly settings
Gamme de produits
Disponibilité en ligne
Non

no

choisir ...
  • Non
Front
Front form
Round

Round

choisir ...
  • Round
  • Square
Front bezel colour
Nature

Nature

choisir ...
  • Black
  • Nature
  • Silver
Front bezel material
Aluminium

Aluminium

choisir ...
  • Aluminium
  • Plastic
Front dimension
Ø 35 mm

Ø 35 mm

choisir ...
  • 35 mm x 35 mm
  • Ø 35 mm
Montage
Design
Flush

Flush

choisir ...
  • Flush
Mounting type
Panel mounting

Panel mounting

choisir ...
  • Panel mounting
Mounting cut-out
Ø 30 mm

Ø 30 mm

choisir ...
  • 30 mm x 30 mm
  • Ø 30 mm
Partie commande/affichage
Lever shape
short

short

choisir ...
  • long
  • short
Lever colour
Black

Black

choisir ...
  • Black
Lever bar colour
translucent

translucent

choisir ...
  • translucent
Illumination colour
White

White

choisir ...
  • Blue
  • Green
  • Red
  • Red / Green
  • Red / Yellow
  • White
  • Yellow
Caractéristiques électriques
Contacts Configuration
1 NO

1 NO

choisir ...
  • 1 NC
  • 1 NC + 1 NO
  • 1 NO
  • 2 NC
  • 2 NO
Switching rating
500 V AC @ 10 A

500 V AC @ 10 A

choisir ...
  • 250 V AC @ 6 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
Operating voltage kind of
V AC/DC

V AC/DC

choisir ...
  • V AC
  • V AC/DC
  • V DC
Operating voltage
110 V

110 V

choisir ...
  • 110 V
  • 12 V
  • 130 V
  • 230 V
  • 24 - 30 V
  • 24 V
  • 28 V
  • 48 V
  • 72 V
Caractéristiques mécaniques
Terminal
Screw terminal

Screw terminal

choisir ...
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Screw terminal
Switching positions
3 positions

3 positions

choisir ...
  • 3 positions
Switching system
Slow-make switching element

Slow-make switching element

choisir ...
  • Slow-make switching element
  • Snap-action switching element
Contact material
Gold

Gold

choisir ...
  • Gold
  • Palladium
  • Silver
Switching action
Momentary - Rest - Momentary

Momentary - Rest - Momentary

choisir ...
  • Maintained - Rest - Maintained
  • Maintained - Rest - Momentary
  • Momentary - Rest - Maintained
  • Momentary - Rest - Momentary
Switching angle
42° left / 42° right

42° left / 42° right

choisir ...
  • 42° left / 42° right
Conditions environnementales
IP front protection
IP65

IP65

choisir ...
  • IP65
Retour
Afficher l'aperçu détaillé des produits
Commutateur sélecteur
https://www.eao.com/p/fd611e81

Selector switch, Series 04, 3 positions, Flush, 1 NO, Screw terminal

  • 704.405.018I
  • 704.951.0
  • 10-4H22.1039P
  • 704.911.1-1

  • Switching action
  • Front bezel material
  • Mounting cut-out
  • Front form
  • Front dimension
  • Lever shape
  • Front bezel colour
704.405.018I
  • Terminal
704.951.0
  • Operating voltage kind of
  • Operating voltage
  • Illumination colour
10-4H22.1039P
  • Switching rating
  • Contact material
  • Switching system
  • Contacts Configuration
704.911.1-1
Ajoute des accessoires & outilage
Ajouter à la comparaison
Ajouter au panier
Votre produit:
704.405.018I
704.951.0
10-4H22.1039P
704.911.1-1

704.405.018I~10-4H22.1039P~704.911.1-1~704.951.0

Selector switch, Series 04, 3 positions, Flush, 1 NO, Screw terminal

Gamme de produits
HMI function:
Selector switch
Séries:
Series 04
Front
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lever colour:
Black
Lever bar colour:
translucent
Lever shape:
short
Illumination colour:
White
Caractéristiques électriques
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts Configuration:
1 NO
Operating voltage:
110 V AC/DC
Operation current:
2 mA -30%/+25%
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Lumi. Intensity:
4 x 446 mcd
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Caractéristiques mécaniques
Terminal:
Screw terminal
Contact material:
Gold
Switching action:
Momentary - Rest - Momentary
Switching system:
Slow-make switching element
Switching positions:
3 positions
Switching angle:
42° left / 42° right
Tightening torque:
Screw terminal 0.5 Nm
Poids total:
0.089 kg
Conditions environnementales
IP front protection:
IP65
Operating temperature:
– 40 °C … + 55 °C
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Autres
Housing material:
Plastic
max. number of switching elements:
3
Wiring diagrams:
Wiring diagrams
Wiring diagrams
Wiring diagrams
Wiring diagrams
Enregistrer ou recommander un produit
Télécharger des fichiers
Ajouter au panier
Votre produit se compose des éléments suivants 4 COMPONENTS:
704.405.018I

704.405.018I

Actuator

Front
Front dimension:
Ø 35 mm
Front form:
Round
Front bezel colour:
Nature
Front bezel material:
Aluminium
Montage
Design:
Flush
Mounting cut-out:
Ø 30.5 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lever colour:
Black
Lever bar colour:
translucent
Lever material:
plastic
Lever shape:
short
Caractéristiques électriques
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1
Caractéristiques mécaniques
Switching action:
Momentary - Rest - Momentary
Switching positions:
3 positions
Switching angle:
42° left / 42° right
Mechanical lifetime:
≤2.5 Mil. cycles of operation
Weight:
0.05 kg
Conditions environnementales
IP Protection:
IP65 front side
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Actuator, Ø 30.5 mm, Ø 35 mm, optional illuminative, Black, short, Round, Nature, Aluminium, anodised, Momentary - Rest - Momentary
Hints:
Max. 3 switching elements can be clipped on
max. number of switching elements:
3
Switching positions:
Switching positions
Wiring diagrams:
Wiring diagrams
Mounting cut-outs:
Mounting cut-outs
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Dimension drawings:
Dimension drawings
X = Screw terminal
Télécharger des fichiers
Où acheter
Ajouter au panier
704.951.0

704.951.0

Lamp block

Caractéristiques électriques
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN 60947-1/DIN EN 60947-5-1
Caractéristiques mécaniques
Terminal:
Screw terminal
Switching positions:
3 positions
Tightening torque:
Screw terminal 0.5 Nm
Wire cross section:
Max. wire cross-section 2 mm x 2.5 mm²
Skinning wire 10 mm
Max. wire cross-section of stranded cable 2 x 1.5 mm²
use stranded wires only with wire end ferrules of 10 mm length
Only one polarity is allowed on each side when wiring.
Weight:
0.017 kg
Conditions environnementales
IP Protection:
IP00
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
Max. 300 m/s², pulse width 11 ms (sinusoidal EN IEC 60068-2-27)
Vibration resistance:
Max. 100 m / s² from 10 Hz ... 500 Hz, (sinusoidal EN IEC 60068-2-6)
Climate resistance:
Relative humidity, max. 95%, non-condensing
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Lamp block, Plastic, Screw terminal
Housing material:
Plastic
Hints:
When using the lamp block, the application guidelines must be observed.
Suitable for connection:
Screw terminal
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Télécharger des fichiers
Où acheter
Ajouter au panier
10-4H22.1039P

10-4H22.1039P

Single-LED

Partie commande/affichage
Illumination colour:
White
Caractéristiques électriques
Operating voltage:
110 V AC/DC
Operation current:
2 mA -30%/+25%
Lumi. Intensity:
4 x 446 mcd
Caractéristiques mécaniques
Weight:
0.002 kg
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Single-LED, BA9s, White, 110 V AC/DC
Kind of iIllumination:
Multi-LED EN 50155
Hints:
A suitable LED remover Part No. 700.006.0
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified 72 and 110 VAC/VDC versions are built with a bridge rectifier
The specified 72 and 110 VAC/VDC versions are built with a protection diode
In case one LED fails, the other pair of still functioning LED›s is working. The light output then is half in order to indicate the malfunction and shows this way the need for replacement
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Télécharger des fichiers
Où acheter
Ajouter au panier
704.911.1-1

704.911.1-1

Switching element - New Version

Caractéristiques électriques
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts:
1 NO
Rated impulse withstand voltage Uimp:
4 kV
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

110 VDC

Current

5 mA

2 mA

Hard silver contacts

Voltage

24 VDC

110 VDC

Current

50 mA

10 mA
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN IEC UL 60947-5-1
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
Caractéristiques mécaniques
Terminal:
Screw terminal
Contact material:
Gold
Switching system:
Slow-make switching element
Switching system:
The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Tightening torque:
Screw terminal 0.8 Nm
Wire cross section:
Wire cross-section 0.75 ... 2.5 mm² / AWG 18 to AWG 14
Skinning wire 10 mm
Max. number of wires: 2
Wire cross-section of stranded cable 0.5 ... 1.5 mm² / AWG 24 to AWG 18
use stranded wires only with wire end ferrules of 10 mm length
Max. number of stranded cables: 2
Only one polarity is allowed on each side when wiring.
Weight:
0.02 kg
Conditions environnementales
IP Protection:
IP20
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
(single impacts, semi-sinusoidal) 300 m/s², pulse width 18 ms, as per DIN EN 60068-2-27
Vibration resistance:
(sinusförmig) 100 m/s² bei 10 Hz…500 Hz, nach DIN EN 60068-2-6, Erhöhtes Breitbandrauschen nach DIN EN 61373, Klasse 1B
Climate resistance:
Relative humidity 10 %rh ... 95 %rh (non-condensing) original packaging according to DIN EN IEC 60721-3-1 Class 1C1
Certificats
Approbations:
CB (IEC 60947-5-1), cULus, DNV, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Switching element - New Version, Slow-make switching element, 500 V AC @ 10 A, Gold, 1 NO, Screw terminal
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
A suitable enclosure is required for applications with increased protection requirements. In North America, the product must be installed in an enclosure in accordance with UL 50E Type 2 or higher.
Special requirements:

Special requirements for positive-opening auxiliary current switches

Positive opening travel

Emergency stop 12.5 mm

Minimum force

Emergency stop 50 N (actuating force at

which is safely switched)

Max. travel

Emergency stop 12.5 mm
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Télécharger des fichiers
Où acheter
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres