Assembly settings
Gamma di prodotti
Disponibilità online
No
no
scegliere ...
Anteriore
Front form
Round
Round
scegliere ...
Front bezel colour
Nature
Nature
scegliere ...
Front bezel material
Aluminium
Aluminium
scegliere ...
Front dimension
Ø 25 mm
Ø 25 mm
scegliere ...
Montaggio
Design
Flush
Flush
scegliere ...
Mounting type
Panel mounting
Panel mounting
scegliere ...
Mounting cut-out
Ø 22 mm
Ø 22 mm
scegliere ...
Unità operativa/display
Lens shape
Flush
Flush
scegliere ...
Lens colour
Colourless
Colourless
scegliere ...
Lens material
Plastic, according to UL 94 HB
Plastic, according to UL 94 HB
scegliere ...
Lens illumination
Illuminated
Illuminated
scegliere ...
Shape of illumination
Front
Front
scegliere ...
Illumination colour
Red
Red
scegliere ...
Caratteristiche elettriche
Configurazione dei contatti
4 NC + 4 NO
4 NC + 4 NO
scegliere ...
Switching rating
250 V @ 3 A
250 V @ 3 A
scegliere ...
Operating voltage kind of
V AC/DC
V AC/DC
scegliere ...
Operating voltage
12 V
12 V
scegliere ...
Caratteristiche meccaniche
Terminal
Soldering terminal
Soldering terminal
scegliere ...
Switching system
Snap-action switching element
Snap-action switching element
scegliere ...
Contact material
Gold
Gold
scegliere ...
Switching action
Maintained
Maintained
scegliere ...
Condizioni ambientali
IP front protection
IP65
IP65
scegliere ...
Indietro
Illuminated push button, Series 51, Ø 25 mm, illuminative, Flush, 4 NC + 4 NO, Gold, IP65, Soldering terminal
- 61-9642.7
- 51-284.0252F
- 61-9933.0
- 10-2J09.1062
- Lens colour
- Lens material
- Shape of illumination
- Switching action
- Terminal
- Switching rating
- Switching system
- Configurazione dei contatti
- Front bezel colour
- Front bezel material
- Operating voltage kind of
- Illumination colour
- Operating voltage
Aggiungere accessori e strumenti
Il vostro prodotto:
Gamma di prodotti
- HMI function:
- Illuminated push button
- Serie:
- Series 51
Anteriore
- Front dimension:
- Ø 25 mm
- Front form:
- Round
- Front bezel colour:
- Nature
- Front bezel material:
- Aluminium
Montaggio
- Design:
- Flush
- Mounting cut-out:
- Ø 22.5 mm
- Mounting type:
- Panel mounting
Unità operativa/display
- Lens colour:
- Colourless
- Lens material:
- Plastic, according to UL 94 HB
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
- Illumination colour:
- Red
- Shape of illumination:
- Front
Caratteristiche elettriche
- Switching voltage and switching current:
250 VAC, 5 A (ohmic)
250 VAC, 3 A (Soldering terminal)
250 VAC, 2 A (inductive, cos(phi) = 0.7)
125 VAC, 3 A (inductive, cos(phi) = 0.7)
220 VDC, 0.1 A (inductive, L:R = 30 ms)
110 VDC, 0.2 A (inductive, L:R = 30 ms)
60 VDC, 0.7 A (inductive, L:R = 30 ms)
24 VDC, 2 A (inductive, L:R = 30 ms)
- Configurazione dei contatti:
- 4 NC + 4 NO
- Operating voltage:
- 12 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Switching rating:
- 250 V @ 3 A
- Electrical lifetime:
- 50 000 cycles of operation
- Lumi. Intensity:
- 330 mcd
- Thermal current Ith:
- The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.3 A
Caratteristiche meccaniche
- Terminal:
- Soldering terminal
- Contact material:
- Gold
- Switching action:
- Maintained
- Switching system:
- Snap-action switching element
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Peso totale:
- 0.017 kg
Condizioni ambientali
- IP front protection:
- IP65
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Vibration resistance:
- 10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
Di più
- Housing colour:
- Black
- Product attributes:
- For indicator, push button, illuminated push button
- max. number of switching elements:
- 4
- Wiring diagrams:
Salvare o raccomandare prodotti
Scarica i file
Aggiungi al carrello
Il prodotto è composto da quanto segue 4 COMPONENTS:
Anteriore
- Front form:
- Round
Unità operativa/display
- Lens colour:
- Colourless
- Lens material:
- Plastic, according to UL 94 HB
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
- Shape of illumination:
- Front
Caratteristiche meccaniche
- Weight:
- 0.001 kg
Certificati
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Lens, Ø 19.7 mm, Illuminated, Colourless, Flush, Plastic, according to UL 94 HB
- Dimension:
- Ø 19.7 mm
Scarica i file
Dove acquistare
Aggiungi al carrello
Montaggio
- Design:
- Flush
- Mounting type:
- Panel mounting
Unità operativa/display
- Lens illumination:
- Illuminated
Caratteristiche elettriche
- Switching voltage and switching current:
250 VAC, 5 A (ohmic)
250 VAC, 3 A (Soldering terminal)
250 VAC, 2 A (inductive, cos(phi) = 0.7)
125 VAC, 3 A (inductive, cos(phi) = 0.7)
220 VDC, 0.1 A (inductive, L:R = 30 ms)
110 VDC, 0.2 A (inductive, L:R = 30 ms)
60 VDC, 0.7 A (inductive, L:R = 30 ms)
24 VDC, 2 A (inductive, L:R = 30 ms)
- Contacts:
- 4 NC / 4 NO
- Rated Operational Voltage Ue:
- 250 VAC/DC according to EN IEC 60947-1
- Switching rating:
- 250 V @ 3 A
- Electrical lifetime:
- 50 000 cycles of operation
- Electric strength:
- 2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
- Protection class:
- ll
- Standards:
- According to EN/IEC 61058-1
- Thermal current Ith:
- The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.3 A
Caratteristiche meccaniche
- Terminal:
- Soldering terminal
- Contact material:
- Gold
- Switching action:
- Maintained
- Switching system:
- Snap-action switching element
- Switching system:
- Self-cleaning, double-break snap action switching system, 1 normally closed and 1 normally open contact per element.
- Mechanical lifetime:
- 1 Mil. cycles of operation (RCC/RPB)
- Operating force:
- 1,8 … 6 N, depending on the number of switching elements
- Operating Travel:
- 3 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Wire cross section:
- Snap-action switching element with tinned soldering terminals at the sidesMax. wire diameter 2 wires à 1.2 mmMax. wire cross-section of stranded cable 1 x 1 mm²
- Weight:
- 0.01 kg
Condizioni ambientali
- IP front protection:
- IP65, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
- Vibration resistance:
- 10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
- Climate resistance:
- Standard condition, as per DIN EN 60068-2-30Changing condition, as per DIN EN 60068-2-14
Certificati
- Approbations:
- CB (IEC 61058-1), CQC, CSA, DNV, EAC, ENEC (EN 61058-1), UL, VDE
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 30 / EU (EMC), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Actuator, Illuminated, 4 NC / 4 NO, Maintained, Soldering terminal, IP65, according to DIN EN 60529
- Housing colour:
- Black
- max. number of switching elements:
- 4
- Wiring diagrams:
- Component layouts:
A = Universal terminal (rear side)
B = Plug-in terminal (rear side)
C = Anti twist device
D = Drilling plan- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Scarica i file
Dove acquistare
Aggiungi al carrello
Anteriore
- Front dimension:
- Ø 25 mm
- Front form:
- Round
- Front bezel colour:
- Nature
- Front bezel material:
- Aluminium
Montaggio
- Mounting cut-out:
- Ø 22.5 mm
- Mounting type:
- Panel mounting
Caratteristiche meccaniche
- Weight:
- 0.005 kg
Certificati
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Front bezel set, Ø 25 mm, Ø 19,7 mm, Nature, Aluminium
- Dimension:
- Ø 25 mm
- Internal size:
- Ø 19,7 mm
- Product attributes:
- For indicator, push button, illuminated push button
- Hints:
- The colour of anodised aluminium parts can vary due to technical production reasons
- Mounting cut-outs:
Scarica i file
Dove acquistare
Aggiungi al carrello
Unità operativa/display
- Illumination colour:
- Red
Caratteristiche elettriche
- Operating voltage:
- 12 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Lumi. Intensity:
- 330 mcd
Caratteristiche meccaniche
- Weight:
- 0.003 kg
Certificati
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Di più
- Short Description:
- Single-LED, T1 ¾ MG, Red, 12 V AC/DC +10%
- Kind of iIllumination:
- Single-LED
- Hints:
- Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)When using AC/DC types with AC operation, slight flickering can occurThe luminous intensity stated is for when used with DCElectrical and optical data are measured at 25 °CThe specified versions are built with a protection diode (halve wave rectifier) in series and the LEDLuminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LEDWhere supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.Keep to the country specific safety instructions
- Wiring diagrams:
- Dimension drawings:
Scarica i file
Dove acquistare
Aggiungi al carrello