Assembly settings
Gamme de produits
Disponibilité en ligne
Oui
yes
choisir ...
Front
Front form
Square
Square
choisir ...
Front bezel colour
Black
Black
choisir ...
Front bezel material
Plastic
Plastic
choisir ...
Front dimension
18 mm x 18 mm
18 mm x 18 mm
choisir ...
Montage
Design
Raised
Raised
choisir ...
Mounting type
Panel mounting
Panel mounting
choisir ...
Mounting cut-out
Ø 16 mm
Ø 16 mm
choisir ...
Partie commande/affichage
Lens shape
Flush
Flush
choisir ...
Lens colour
Colourless
Colourless
choisir ...
Lens material
Plastic
Plastic
choisir ...
Lens illumination
Illuminated
Illuminated
choisir ...
Illumination colour
Red
Red
choisir ...
Caractéristiques électriques
Contacts Configuration
1 NC + 1 NO
1 NC + 1 NO
choisir ...
Switching rating
250 V @ 3 A
250 V @ 3 A
choisir ...
Operating voltage kind of
V AC/DC
V AC/DC
choisir ...
Operating voltage
12 V
12 V
choisir ...
Caractéristiques mécaniques
Terminal
Soldering terminal
Soldering terminal
choisir ...
Switching system
Snap-action switching element
Snap-action switching element
choisir ...
Contact material
Gold
Gold
choisir ...
Switching action
Momentary
Momentary
choisir ...
Conditions environnementales
IP front protection
IP65
IP65
choisir ...
Retour
Illuminated push button, Series 51, 18 mm x 18 mm, illuminative, Raised, 1 NC + 1 NO, Gold, IP65, Soldering terminal
- 51-953.7
- 51-151.0252
- 10-2J09.1062
- Lens colour
- Lens shape
- Front form
- Switching action
- Terminal
- Switching rating
- Switching system
- Front dimension
- Contacts Configuration
- Operating voltage kind of
- Illumination colour
- Operating voltage
Ajoute des accessoires & outilage
Votre produit:
Gamme de produits
- HMI function:
- Illuminated push button
- Séries:
- Series 51
Front
- Front dimension:
- 18 mm x 18 mm
- Front form:
- Square
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Montage
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
Partie commande/affichage
- Lens colour:
- Colourless
- Lens material:
- Plastic
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
- Illumination colour:
- Red
Caractéristiques électriques
- Switching voltage and switching current:
250 VAC, 5 A (ohmic)
250 VAC, 3 A (Soldering terminal)
250 VAC, 2 A (inductive, cos(phi) = 0.7)
125 VAC, 3 A (inductive, cos(phi) = 0.7)
220 VDC, 0.1 A (inductive, L:R = 30 ms)
110 VDC, 0.2 A (inductive, L:R = 30 ms)
60 VDC, 0.7 A (inductive, L:R = 30 ms)
24 VDC, 2 A (inductive, L:R = 30 ms)
- Contacts Configuration:
- 1 NC + 1 NO
- Operating voltage:
- 12 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Switching rating:
- 250 V @ 3 A
- Electrical lifetime:
- 50 000 cycles of operation
- Lumi. Intensity:
- 330 mcd
- Thermal current Ith:
- The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.3 A
Caractéristiques mécaniques
- Terminal:
- Soldering terminal
- Contact material:
- Gold
- Switching action:
- Momentary
- Switching system:
- Snap-action switching element
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Poids total:
- 0.008 kg
Conditions environnementales
- IP front protection:
- IP65
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Vibration resistance:
- 10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
Autres
- Housing colour:
- Black
- Wiring diagrams:
Enregistrer ou recommander un produit
Télécharger des fichiers
Ajouter au panier
Votre produit se compose des éléments suivants 3 COMPONENTS:
Front
- Front form:
- Square
Partie commande/affichage
- Lens colour:
- Colourless
- Lens material:
- Plastic
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
Caractéristiques mécaniques
- Weight:
- 0.001 kg
Certificats
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Autres
- Short Description:
- Lens, 15.3 mm x 15.3 mm, Illuminated, Colourless, Flush, Plastic
- Dimension:
- 15.3 mm x 15.3 mm
Télécharger des fichiers
Où acheter
Ajouter au panier
Front
- Front dimension:
- 18 mm x 18 mm
- Front form:
- Square
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
Montage
- Design:
- Raised
- Mounting type:
- Panel mounting
Partie commande/affichage
- Lens illumination:
- Illuminated
Caractéristiques électriques
- Switching voltage and switching current:
250 VAC, 5 A (ohmic)
250 VAC, 3 A (Soldering terminal)
250 VAC, 2 A (inductive, cos(phi) = 0.7)
125 VAC, 3 A (inductive, cos(phi) = 0.7)
220 VDC, 0.1 A (inductive, L:R = 30 ms)
110 VDC, 0.2 A (inductive, L:R = 30 ms)
60 VDC, 0.7 A (inductive, L:R = 30 ms)
24 VDC, 2 A (inductive, L:R = 30 ms)
- Contacts:
- 1 NC / 1 NO
- Rated Operational Voltage Ue:
- 250 VAC/DC according to EN IEC 60947-1
- Switching rating:
- 250 V @ 3 A
- Electrical lifetime:
- 50 000 cycles of operation
- Electric strength:
- 2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
- Protection class:
- ll
- Standards:
- According to EN/IEC 61058-1
- Thermal current Ith:
- The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.3 A
Caractéristiques mécaniques
- Terminal:
- Soldering terminal
- Contact material:
- Gold
- Switching action:
- Momentary
- Switching system:
- Snap-action switching element
- Switching system:
- Self-cleaning, double-break snap action switching system, 1 normally closed and 1 normally open contact per element.
- Mechanical lifetime:
- 2 Mil. cycles of operation
- Operating force:
- 1,8 … 6 N, depending on the number of switching elements
- Operating Travel:
- 3 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Wire cross section:
- Snap-action switching element with tinned soldering terminals at the sidesMax. wire diameter 2 wires à 1.2 mmMax. wire cross-section of stranded cable 1 x 1 mm²
- Weight:
- 0.006 kg
Conditions environnementales
- IP front protection:
- IP65, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
- Vibration resistance:
- 10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
- Climate resistance:
- Standard condition, as per DIN EN 60068-2-30Changing condition, as per DIN EN 60068-2-14
Certificats
- Approbations:
- CB (IEC 61058-1), CQC, CSA, DNV, EAC, ENEC (EN 61058-1), UL, VDE
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 30 / EU (EMC), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Autres
- Short Description:
- Actuator, 18 mm x 18 mm, Illuminated, Square, Black, Plastic, 1 NC / 1 NO, Momentary, Soldering terminal, IP65, according to DIN EN 60529
- Internal size:
- 15,3 mm x 15,3 mm
- Housing colour:
- Black
- Wiring diagrams:
- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
D = Universal-Solder terminal
Télécharger des fichiers
Où acheter
Ajouter au panier
Partie commande/affichage
- Illumination colour:
- Red
Caractéristiques électriques
- Operating voltage:
- 12 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Lumi. Intensity:
- 330 mcd
Caractéristiques mécaniques
- Weight:
- 0.003 kg
Certificats
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Autres
- Short Description:
- Single-LED, T1 ¾ MG, Red, 12 V AC/DC +10%
- Kind of iIllumination:
- Single-LED
- Hints:
- Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)When using AC/DC types with AC operation, slight flickering can occurThe luminous intensity stated is for when used with DCElectrical and optical data are measured at 25 °CThe specified versions are built with a protection diode (halve wave rectifier) in series and the LEDLuminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LEDWhere supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.Keep to the country specific safety instructions
- Wiring diagrams:
- Dimension drawings:
Télécharger des fichiers
Où acheter
Ajouter au panier