Montrer les alternatives
Assembly settings
Gamme de produits
Disponibilité en ligne
Oui

yes

choisir ...
  • Non
  • Oui
Front
Front form
Round

Round

choisir ...
  • Round
Front dimension
Ø 24,5 mm

Ø 24,5 mm

choisir ...
  • Ø 24,5 mm
Montage
Design
Raised

Raised

choisir ...
  • Raised
Mounting type
Panel mounting

Panel mounting

choisir ...
  • Panel mounting
Mounting cut-out
Ø 16 mm

Ø 16 mm

choisir ...
  • Ø 16 mm
Partie commande/affichage
Lens shape
Mushroom-head

Mushroom-head

choisir ...
  • Mushroom-head
Lens colour
Red

Red

choisir ...
  • Black
  • Blue
  • Green
  • Grey
  • Red
  • Yellow
Lens material
Plastic

Plastic

choisir ...
  • Plastic
Lens illumination
Non illuminated

Non illuminated

choisir ...
  • Non illuminated
Caractéristiques électriques
Contacts Configuration
2 NC

2 NC

choisir ...
  • 1 NC
  • 1 NC + 1 NO
  • 2 NC
  • 2 NC + 2 NO
Switching rating
42 V AC @ 0,1 A

42 V AC @ 0,1 A

choisir ...
  • 250 V @ 5 A
  • 42 V AC @ 0,1 A
Caractéristiques mécaniques
Release type
Twist to unlock

Twist to unlock

choisir ...
  • Twist to unlock
Terminal
Universal terminal, 2 x 0.5 mm

Universal terminal, 2 x 0.5 mm

choisir ...
  • Plug-in terminal, 2.8 x 0.5 mm
  • Soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Low-level element

Low-level element

choisir ...
  • Low-level element
  • Snap-action switching element
Contact material
Gold

Gold

choisir ...
  • Gold
Switching action
Maintained

Maintained

choisir ...
  • Maintained
Conditions environnementales
IP front protection
IP65

IP65

choisir ...
  • IP65
Retour
Afficher l'aperçu détaillé des produits
Bouton d'arrêt d'urgence & Bouton d’arrêt
https://www.eao.com/p/f1c7990b

Stop switch, Series 51, Ø 24,5 mm, Raised, 2 NC, IP65, Universal terminal, 2 x 0.5 mm

  • 51-252.026

  • Lens colour
  • Terminal
  • Switching system
  • Switching rating
  • Contacts Configuration
51-252.026
Ajoute des accessoires & outilage
Ajouter à la comparaison
Ajouter au panier
Votre produit:
51-252.026

51-252.026

Stop switch, Series 51, Ø 24,5 mm, Raised, 2 NC, IP65, Universal terminal, 2 x 0.5 mm

Gamme de produits
HMI function:
Stop switch
Séries:
Series 51
Front
Front dimension:
Ø 24,5 mm
Front form:
Round
Montage
Design:
Raised
Mounting cut-out:
Ø 16 mm
Mounting type:
Panel mounting
Partie commande/affichage
Lens colour:
Red
Lens material:
Plastic
Lens illumination:
Non illuminated
Lens shape:
Mushroom-head
Lens optics:
opaque
Caractéristiques électriques
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts Configuration:
2 NC
Switching rating:
42 V AC @ 0,1 A
Caractéristiques mécaniques
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained
Switching system:
Low-level element
Release type:
Twist to unlock
Tightening torque:
Fixing nut max. 0.5 Nm
Poids total:
0.011 kg
Conditions environnementales
IP front protection:
IP65
Operating temperature:
– 25 °C … + 55 °C
Autres
Housing colour:
Black
Wiring diagrams:
Wiring diagrams
Enregistrer ou recommander un produit
Télécharger des fichiers
Ajouter au panier
Votre produit se compose des éléments suivants 1 COMPONENTS:
51-252.026

51-252.026

Actuator

Front
Front dimension:
Ø 24,5 mm
Front form:
Round
Montage
Design:
Raised
Mounting type:
Panel mounting
Partie commande/affichage
Lens colour:
Red
Lens material:
Plastic
Lens illumination:
Non illuminated
Lens shape:
Mushroom-head
Lens optics:
opaque
Caractéristiques électriques
Switching voltage and switching current:
100 mA at 42 VAC/VDC
Contacts:
2 NC
Switching rating:
42 V AC @ 0,1 A
Caractéristiques mécaniques
Terminal:
Universal terminal, 2 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained
Switching system:
Low-level element
Switching system:
This low-level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few μA/μV up to 100 mA/ 42 VAC/DC.
Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contactsper switching element; combination of normally open and normally closed is possible.
Special features are the long life, extremely short rebound time and stable contact resistance.
Release type:
Twist to unlock
Mechanical lifetime:
1 Mil. cycles of operation (RCC/RPB)
Operating force:
18 … 21 N (depending on the switching element)
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.5 Nm
Terminal details 1:
The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.
For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
Weight:
0.015 kg
Conditions environnementales
IP front protection:
IP65, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Certificats
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Actuator, Ø 24,5 mm, Mushroom-head, Non illuminated, Red, Plastic, opaque, Round, 2 NC, Maintained, Universal terminal, 2 x 0.5 mm, IP65, according to DIN EN 60529, Twist to unlock
Housing colour:
Black
Hints:
Marking arrows
Wiring diagrams:
Wiring diagrams
Mounting cut-outs:
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Télécharger des fichiers
Où acheter
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres