Ontdek de catalogus
Assembly settings
Voor
Colour
Colourless

Colourless

kiezen...
  • Black
  • Blue
  • Colourless
  • Green
  • Grey
  • Nature
  • Orange
  • Red
  • Silver
  • Traffic blue
  • White
  • Yellow
Omgevingscondities
IP front protection
IP65, IP67

IP65, IP67

kiezen...
  • IP20
  • IP20 / IP66 with cap closed (IEC-EN60529)
  • IP40
  • IP44
  • IP65
  • IP65, IP66
  • IP65, IP66, IP67, according to DIN EN 60529
  • IP65, IP67
  • IP65, according to DIN EN 60529
  • IP66
  • IP66, IP67, IP69K
  • IP67
  • IP67 (ISO 20653)
  • IP67, according to DIN EN 60529
  • IP67, according to IEC 60529
  • IP69K
Meer
Optics
transparent

transparent

kiezen...
  • opaque
  • translucent
  • transparent
Material
Silicone

Silicone

kiezen...
  • Aluminium
  • Brass
  • Metal
  • Metal / plastic
  • Plastic
  • Plastic, according to UL 94 V0
  • Plastic, heat-resistant and self-extinguishing
  • Pvc
  • Silicone
  • Stainless steel
  • Steel plate
Titel Accessory
Front protective cap

Front protective cap

kiezen...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Electronic module
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Protective shroud, 6PB
  • Protective shroud, 8PB
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Symbol 0000 - blank
  • Symbol 0027 - Cooling; air conditioning
  • Symbol 0083 - Low beam; dipped beam
  • Symbol 0084 - Turn signals
  • Symbol 0085 - Hazard warning
  • Symbol 0086 - Windscreen wiper; windshield wiper
  • Symbol 0087 - Windscreen washer and wiper
  • Symbol 0097 - Rear window wiper
  • Symbol 0238 - Parking brake
  • Symbol 0244 - Horn
  • Symbol 0251 - Functional arrow; group select
  • Symbol 0635A - Windscreen demisting and defrosting
  • Symbol 0636A - Rear window demisting and defrosting
  • Symbol 0637A - Interior heating; heater
  • Symbol 0649A - Heated seat
  • Symbol 0651A - Horizontal return with line spacing
  • Symbol 0717 - Call for maintenance
  • Symbol 1141A - Identification light; beacon
  • Symbol 1204 - Flood light; working light
  • Symbol 1421A - Interior compartment illumination; interior (dome) light
  • Symbol 2025 - Scrolling
  • Symbol 2026 - Help
  • Symbol 2037 - Backspace
  • Terminal cover
  • Terminal marking - New Version
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Wall mounting kit
Terug
Toon gedetailleerd productoverzicht
https://www.eao.com/component/82-911.1/nl/fro...

Front protective cap

  • 82-911.1

82-911.1 Front protective cap, Ø 19 mm, Silicone, transparent, Colourless
82-911.1
Toevoegen aan winkelwagentje
Uw product:
82-911.1

82-911.1

Front protective cap

Voor
Colour:
Colourless
Mechanische kenmerken
Weight:
0.002 kg
Omgevingscondities
IP front protection:
IP65, IP67
Meer
Short Description:
Front protective cap, Ø 19 mm, Silicone, transparent, Colourless
Titel Accessory:
Front protective cap
Dimension:
Ø 19 mm
Material:
Silicone
Product attributes:
For button Ø 19 mm
Hints:
Suitable for indicator, push button and illuminated push button with flush design and lens flat/level with front ring
The exterior flush seal must be removed before mounting the protective cap
Up to 300 000 actuations possible
Optics:
transparent
Bestanden downloaden
Toevoegen aan winkelwagentje
Cookie toestemming
Onze website maakt gebruik van cookies. Voor meer informatie over cookies op deze website verwijzen wij u naar onze Privacybeleid en kunt u meer over ons lezen in de Legal Notice. U kunt de instellingen wijzigen in de Privacybeleid.
Accepteren
Afwijzen
Instellingen beheren