Explorer le catalogue
Assembly settings
Autres
Marking
22/12 42/32

22/12 42/32

choisir ...
  • 11/21 31/41
  • 13/21 33/41
  • 13/23 33/43
  • 22/12 42/32
  • 22/14 42/34
  • 24/14 44/34
  • 51/61 71/81
  • 53/61 73/81
  • 53/63 73/83
  • 62/52 82/72
  • 62/54 82/74
  • 64/54 84/74
  • ARRET D'URGENCE
  • Arrows
  • EMERGENCY STOP
  • EMERGENCY-STOP
  • EN ISO 13850 symbol
  • NOT - AUS
  • NOT - HALT
  • NOT AUS
  • NOT HALT
  • NOT-AUS
  • Stop
  • Stop + Arrows
  • Symbol EN ISO 13850 symbol (Stop switch)
  • without marking
Titel Accessory
Terminal marking - Not recommended for new design

Terminal marking - Not recommended for new design

choisir ...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Electronic module
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Protective shroud, 6PB
  • Protective shroud, 8PB
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Symbol 0000 - blank
  • Symbol 0027 - Cooling; air conditioning
  • Symbol 0083 - Low beam; dipped beam
  • Symbol 0084 - Turn signals
  • Symbol 0085 - Hazard warning
  • Symbol 0086 - Windscreen wiper; windshield wiper
  • Symbol 0087 - Windscreen washer and wiper
  • Symbol 0097 - Rear window wiper
  • Symbol 0238 - Parking brake
  • Symbol 0244 - Horn
  • Symbol 0251 - Functional arrow; group select
  • Symbol 0635A - Windscreen demisting and defrosting
  • Symbol 0636A - Rear window demisting and defrosting
  • Symbol 0637A - Interior heating; heater
  • Symbol 0649A - Heated seat
  • Symbol 0651A - Horizontal return with line spacing
  • Symbol 0717 - Call for maintenance
  • Symbol 1141A - Identification light; beacon
  • Symbol 1204 - Flood light; working light
  • Symbol 1421A - Interior compartment illumination; interior (dome) light
  • Symbol 2025 - Scrolling
  • Symbol 2026 - Help
  • Symbol 2037 - Backspace
  • Terminal cover
  • Terminal marking - New Version
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Wall mounting kit
Retour
Afficher l'aperçu détaillé des produits
https://www.eao.com/component/704.965.6/fr/te...

Terminal marking - Not recommended for new design

  • 704.965.6

704.965.6 Terminal marking - Not recommended for new design, 22/12 42/32
704.965.6
Ajouter au panier
Votre produit:
704.965.6

704.965.6

Terminal marking - Not recommended for new design

Caractéristiques mécaniques
Weight:
0 kg
Autres
Short Description:
Terminal marking - Not recommended for new design, 22/12 42/32
Titel Accessory:
Terminal marking - Not recommended for new design
Marking:
22/12 42/32
Product attributes:
2 NC for 1st or 2nd switching element
Télécharger des fichiers
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres