Assembly settings
Elektrische kenmerken
Contacts
2 NO
2 NO
kiezen...
Switching rating
250 V AC @ 6 A
250 V AC @ 6 A
kiezen...
Mechanische kenmerken
Terminal
Push-in terminal
Push-in terminal
kiezen...
Switching system
Snap-action switching element
Snap-action switching element
kiezen...
Contact material
Gold
Gold
kiezen...
Terug
Switching element - Not recommended for new design
- 704.907.3
Uw product:
Assortiment
- Product Status:
- Not Recommended for new design
- successor product:
- https://www.eao.com/c/704.907.3-1
Elektrische kenmerken
- Switching voltage and switching current:
as per DIN EN IEC 60947-5-1
voltage
DC13
AC15
24 V
2,5 A
60 V
0,8 A
110 V
0,6 A
120 V
4,5 A
230 V
0,2 A
4,5 A
400 V
0,15 A
4,0 A
500 V
0,7 A
2,5 A
as per UL 60947-5-1
voltage
power
24 VDC
2,5 A, Pilot duty
60 VDC
0,8 A, Pilot duty
120 VDC
0,6 A, Pilot duty
240 VDC
0,2 A, Pilot duty
415 VDC
0,15 A, Pilot duty
480 VDC
0,07A, Pilot duty
120 VAC
4,5 A, Pilot duty
240 VAC
4,5 A, Pilot duty
415 VAC
4,0 A, Pilot duty
480 VAC
2,5 A, Pilot duty
- Contacts:
- 2 NO
- Rated impulse withstand voltage Uimp:
- 4 kV, according to EN/IEC 60947-5-1
- Rated insulation voltage Ui:
- 500 V
- Recommended minimum operational data:
Gold-silver contacts
Voltage
24 VDC
Current
5 mA
Hard silver contacts
Voltage
24 VDC
Current
50 mA
- Switching rating:
- 250 V AC @ 6 A
- Electrical lifetime:
- 50 000 cycles of operation
- Pollution degree:
- 3
- Standards:
- The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1
- Thermal current Ith:
- 6 A 10 A Max. zulässiger Strom bei Dauerbetrieb und Umgebungstemperaturen, welche die angegebenen max. Werte nicht überschreiten. 10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.
Mechanische kenmerken
- Terminal:
- Push-in terminal
- Contact material:
- Gold
- Switching system:
- Snap-action switching element
- Switching system:
- The double-break, snap-action switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The snap-action switching element is fitted with self-cleaning contacts.
- Operating force:
- 1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
- Wire cross section:
- Max. wire cross-section 2 wires with 1 mmSkinning wire 8 mmMax. wire cross-section of stranded cable 2 x 0.75 mm²use stranded wires only with wire end ferrules of 8 mm lengthOnly one polarity is allowed on each side when wiring.
- Weight:
- 0.029 kg
Omgevingscondities
- IP Protection:
- IP20
- Operating temperature:
- – 40 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 300 m/s², pulse width 18 ms, (single impacts, semi-sinusoidal as per EN IEC 60068-2-27)
- Vibration resistance:
- Max. 100 m/s² from 10 Hz ... 500 Hz (sinusoidal DIN EN 60068-2-6 and EN 61373, increased broad band noise, class 1B)
- Climate resistance:
- Relative humidity, max. 95%, non-condensing
Certificaten
- Approbations:
- CB (IEC 60947-5-1), cULus, DNV, EAC, NFF, VDE
- Conformities:
- CE, CCC, UKCA
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Meer
- Short Description:
- Switching element - Not recommended for new design, Snap-action switching element, 250 V AC @ 6 A, Gold, 2 NO, Push-in terminal
- Hints:
- When using the switching element, the application guidelines must be observed.For the third switching element the terminal marking insert is to be ordered separatelyOperating temperature: Other temperatures on request
- Wiring diagrams:
- Dimension drawings:
A = Screw terminal
B = Push-in terminal (PIT)
C = Plug-in terminal 6.3 mm x 0.8 mm
D = Double plug-in terminal 6.3 mm x 0.8 mm
Bestanden downloaden
Toevoegen aan winkelwagentje