Esplora il catalogo
Assembly settings
Montaggio
Mounting cut-out
Ø 22 mm

Ø 22 mm

scegliere ...
  • 107 mm x 69 mm
  • 143 mm x 69 mm
  • 21 mm x 21 mm
  • 21 mm x 27 mm
  • 21 mm x 29 mm
  • 21 mm x 41 mm
  • 22 mm x 30 mm
  • 23 mm x 23 mm
  • 27 mm x 21 mm
  • 30 mm x 30 mm
  • 41 mm x 21 mm
  • 80 mm x 53 mm
  • Ø 14 mm
  • Ø 16 mm
  • Ø 19 mm
  • Ø 22 mm
  • Ø 25 mm
  • Ø 30 mm
  • Ø 33 mm
  • Ø 6 mm
  • Ø 8 mm
Di più
Material
Aluminium

Aluminium

scegliere ...
  • Aluminium
  • Brass
  • Metal
  • Metal / plastic
  • Plastic
  • Plastic, according to UL 94 V0
  • Plastic, heat-resistant and self-extinguishing
  • Pvc
  • Silicone
  • Stainless steel
  • Steel plate
Titel Accessory
Reducing ring

Reducing ring

scegliere ...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Electronic module
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Protective shroud, 6PB
  • Protective shroud, 8PB
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Symbol 0000 - blank
  • Symbol 0027 - Cooling; air conditioning
  • Symbol 0083 - Low beam; dipped beam
  • Symbol 0084 - Turn signals
  • Symbol 0085 - Hazard warning
  • Symbol 0086 - Windscreen wiper; windshield wiper
  • Symbol 0087 - Windscreen washer and wiper
  • Symbol 0097 - Rear window wiper
  • Symbol 0238 - Parking brake
  • Symbol 0244 - Horn
  • Symbol 0251 - Functional arrow; group select
  • Symbol 0635A - Windscreen demisting and defrosting
  • Symbol 0636A - Rear window demisting and defrosting
  • Symbol 0637A - Interior heating; heater
  • Symbol 0649A - Heated seat
  • Symbol 0651A - Horizontal return with line spacing
  • Symbol 0717 - Call for maintenance
  • Symbol 1141A - Identification light; beacon
  • Symbol 1204 - Flood light; working light
  • Symbol 1421A - Interior compartment illumination; interior (dome) light
  • Symbol 2025 - Scrolling
  • Symbol 2026 - Help
  • Symbol 2037 - Backspace
  • Symbol 2047 - Cruise control
  • Terminal cover
  • Terminal marking
  • Terminal plate empty
  • Test module
  • Wall mounting kit
Indietro
Mostra una panoramica dettagliata del prodotto
https://www.eao.com/component/61-9960/it/redu...

Reducing ring

  • 61-9960

61-9960 Reducing ring, Ø 22.5 mm, Aluminium
61-9960
Aggiungi al carrello
Il vostro prodotto:
61-9960

61-9960

Reducing ring

Montaggio
Mounting cut-out:
Ø 22.5 mm
Caratteristiche elettriche
Forward voltage:
Caratteristiche meccaniche
Weight:
0.001 kg
Di più
Short Description:
Reducing ring, Ø 22.5 mm, Aluminium
Titel Accessory:
Reducing ring
Material:
Aluminium
Hints:
Only for use of devices with front size 24 x 24 mm and Ø 24 mm, mounting cut-out Ø 22.3 mm to Ø 16.2 mm, without keylock- and selector switch
Dimension drawings:
Dimension drawings
Scarica i file
Aggiungi al carrello
Informazioni sui Cookie
Il nostro sito web utilizza i cookie. Per ulteriori informazioni sui cookie utilizzati in questo sito web, consultare la nostra Informativa sulla Privacy e per saperne di più su di noi, consultare la Informazioni Corporate. È possibile modificare le impostazioni nella Informativa sulla Privacy.
Accetta tutti i cookie
Nega tutti i cookie
Gestisci impostazioni