Explorer le catalogue
Assembly settings
Front
Colour
Colourless

Colourless

choisir ...
  • Black
  • Blue
  • Colourless
  • Green
  • Grey
  • Nature
  • Orange
  • Red
  • Silver
  • Traffic blue
  • White
  • Yellow
Front dimension
Ø 25 mm

Ø 25 mm

choisir ...
  • 18 mm
  • 18 mm x 18 mm
  • 18,4 mm x 18,4 mm
  • 18,8 mm x 18,8 mm
  • 20 mm x 23,5 mm
  • 24 mm x 18 mm
  • 24 mm x 23,5 mm
  • 24 mm x 24 mm
  • 26 mm x 26 mm
  • 26,4 mm x 29 mm
  • 29,8 mm x 29,8 mm
  • 30 mm x 24 mm
  • 30 mm x 30 mm
  • 35 mm x 35 mm
  • 36 mm x 24 mm
  • 48 mm x 24 mm
  • 58 mm x 29 mm
  • 58 mm x 30 mm
  • 58 mm x 35 mm
  • 85 mm x 85 mm
  • 9 mm x 9 mm
  • Ø 16 mm
  • Ø 18 mm
  • Ø 18,3 mm
  • Ø 22 mm
  • Ø 24 mm
  • Ø 24,5 mm
  • Ø 25 mm
  • Ø 27 mm
  • Ø 29 mm
  • Ø 29,5 mm
  • Ø 30 mm
  • Ø 32 mm
  • Ø 34 mm
  • Ø 34,75 mm
  • Ø 35 mm
  • Ø 37 mm
  • Ø 38 mm
  • Ø 39 mm
  • Ø 40 mm
  • Ø 42 mm
  • Ø 50 mm
  • Ø 60 mm
  • Ø 7 mm
  • Ø 9 mm
  • Ø 9,5 mm
  • Ø 90 mm
Montage
Design
Flush

Flush

choisir ...
  • Flush
  • PCB
  • Raised
Mounting cut-out
Ø 22 mm

Ø 22 mm

choisir ...
  • 21 mm x 21 mm
  • 21 mm x 27 mm
  • 21 mm x 29 mm
  • 21 mm x 41 mm
  • 22 mm x 30 mm
  • 27 mm x 21 mm
  • 30 mm x 30 mm
  • 41 mm x 21 mm
  • Ø 14 mm
  • Ø 16 mm
  • Ø 19 mm
  • Ø 22 mm
  • Ø 25 mm
  • Ø 30 mm
  • Ø 33 mm
  • Ø 6 mm
  • Ø 8 mm
Autres
Optics
transparent

transparent

choisir ...
  • opaque
  • translucent
  • transparent
Material
Plastic

Plastic

choisir ...
  • Aluminium
  • Brass
  • Metal
  • Metal / plastic
  • Plastic
  • Plastic, according to UL 94 V0
  • Plastic, heat-resistant and self-extinguishing
  • Pvc
  • Silicone
  • Stainless steel
  • Steel plate
Titel Accessory
Protection cover

Protection cover

choisir ...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Electronic module
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Terminal cover
  • Terminal marking - New Version
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Tool set
  • Wall mounting kit
  • Wall-mounting bracket
Retour
Afficher l'aperçu détaillé des produits
https://www.eao.com/component/61-9924.0/fr/pr...

Protection cover

  • 61-9924.0

61-9924.0 Protection cover, Ø 25 mm, Ø 22.5 mm, Plastic, transparent, Colourless
61-9924.0
Ajouter au panier
Votre produit:
61-9924.0

61-9924.0

Protection cover

Front
Front dimension:
Ø 25 mm
Colour:
Colourless
Montage
Design:
Flush
Mounting cut-out:
Ø 22.5 mm
Caractéristiques mécaniques
Weight:
0.006 kg
Autres
Short Description:
Protection cover, Ø 25 mm, Ø 22.5 mm, Plastic, transparent, Colourless
Titel Accessory:
Protection cover
Dimension:
Ø 25 mm
Material:
Plastic
Product attributes:
Slide by side, without cover locking hole, for device with front dimension Ø 25 mm
Optics:
transparent
Mounting cut-outs:
Mounting cut-outs
Dimension drawings:
Dimension drawings
for Part No. 61-9924.0
Télécharger des fichiers
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres