Afficher le composant dans le produit
Assembly settings
Montage
Design
Flush

Flush

choisir ...
  • Flush
  • PCB
  • Raised
Mounting type
Panel mounting

Panel mounting

choisir ...
  • For sticking or snapping in place
  • Panel mounting
  • adhesive
  • for snapping in place
  • pole mounting Ø35mm
  • pole mounting Ø38mm
  • wall mounting
Partie commande/affichage
Lens illumination
Illuminated

Illuminated

choisir ...
  • Illuminated
  • Non illuminated
  • Optional illuminated
Caractéristiques électriques
Contacts
2 NC / 2 NO

2 NC / 2 NO

choisir ...
  • 1 C
  • 1 NC
  • 1 NC / 1 FS
  • 1 NC / 1 MC
  • 1 NC / 1 NO
  • 1 NC / 2 NO
  • 1 NO
  • 2 C
  • 2 NC
  • 2 NC / 1 NO
  • 2 NC / 2 NO
  • 2 NO
  • 3 NC
  • 3 NC / 3 NO
  • 3 NO
  • 4 NC / 4 NO
Switching rating
250 V @ 3 A

250 V @ 3 A

choisir ...
  • 150 V AC/DC @ 3 A
  • 150 V AC/DC @ 5 A
  • 24 V DC @ 0,2 A
  • 240 V
  • 240 V @ 3 A
  • 240 V AC @ 3 A
  • 250 V
  • 250 V @ 10 A
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 250 V AC @ 1,5 A
  • 250 V AC @ 3 A
  • 250 V AC @ 6 A
  • 250 V AC/DC
  • 250 V AC/DC @ 5 A
  • 30 V DC @ 0,1 A
  • 35 V @ 3 A
  • 35 V AC/DC @ 0,5 A
  • 35 V AC/DC @ 0,6 A
  • 36 V AC/DC @ 0,6 A
  • 400 V @ 10 A
  • 42 V
  • 42 V @ 0,1 A
  • 42 V AC @ 0,1 A
  • 42 V AC/DC @ 0,1 A
  • 42 V DC @ 0,1 A
  • 440 V AC @ 10 A
  • 48 V DC @ 0,5 A
  • 5 A
  • 50 V @ 0,1 A
  • 50 V @ 0,8 A
  • 50 V AC/DC @ 0,2 A
  • 50 V AC/DC @ 0,3 A
  • 500 V @ 10 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
  • 600 V AC @ 1,2 A
Caractéristiques mécaniques
Terminal
Soldering terminal

Soldering terminal

choisir ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
Switching system
Snap-action switching element

Snap-action switching element

choisir ...
  • Capacitive
  • Low-level element
  • Short-travel element
  • Slow-make switching element
  • Snap-action switching element
Contact material
Gold

Gold

choisir ...
  • Gold
  • Gold-plated silver
  • Palladium
  • Rhodium/Silver
  • Silver
Switching action
Maintained

Maintained

choisir ...
  • Maintained
  • Maintained (a) - Maintained
  • Maintained (a) - Rest (a) - Maintained
  • Maintained (a) - Rest (a) - Maintained (a)
  • Maintained (a) - Rest (a) - Momentary
  • Maintained (a) - Rest - Maintained
  • Maintained (a) - Rest - Maintained (a)
  • Maintained (a) - Rest - Momentary
  • Maintained - Maintained
  • Maintained - Maintained - Maintained - Maintained
  • Maintained - Maintained - Maintained - Momentary
  • Maintained - Maintained - Momentary - Momentary
  • Maintained - Momentary
  • Maintained - Momentary - Momentary - Momentary
  • Maintained - Rest
  • Maintained - Rest (a)
  • Maintained - Rest (a) - Maintained
  • Maintained - Rest (a) - Maintained (a)
  • Maintained - Rest (a) - Momentary
  • Maintained - Rest - Maintained
  • Maintained - Rest - Maintained (a)
  • Maintained - Rest - Momentary
  • Maintained or momentary
  • Momentary
  • Momentary - Rest
  • Momentary - Rest (a) - Maintained
  • Momentary - Rest (a) - Maintained (a)
  • Momentary - Rest (a) - Momentary
  • Momentary - Rest - Maintained
  • Momentary - Rest - Momentary
  • Momentary / maintained
  • Rest (a) - Maintained
  • Rest (a) - Maintained (a)
  • Rest (a) - Momentary
  • Rest - Maintained
  • Rest - Maintained (a)
  • Rest - Maintained - Maintained - Maintained - Maintained
  • Rest - Momentary
Conditions environnementales
IP front protection
IP65, according to DIN EN 60529

IP65, according to DIN EN 60529

choisir ...
  • IP20
  • IP20 / IP66 with cap closed (IEC-EN60529)
  • IP40
  • IP40, according to IEC 60529
  • IP44
  • IP65
  • IP65, IP66
  • IP65, IP66, IP67, according to DIN EN 60529
  • IP65, IP67
  • IP65, according to DIN EN 60529
  • IP66
  • IP66, IP67, IP69K
  • IP67
  • IP67 (ISO 20653)
  • IP67, according to DIN EN 60529
  • IP67, according to IEC 60529
  • IP69K
Retour
Afficher l'aperçu détaillé des produits
https://www.eao.com/component/51-282.0252F/fr...

Actuator

  • 51-282.0252F

51-282.0252F Actuator, Illuminated, 2 NC / 2 NO, Maintained, Soldering terminal, IP65, according to DIN EN 60529
51-282.0252F
Ajouter au panier
Votre produit:
51-282.0252F

51-282.0252F

Actuator

Montage
Design:
Flush
Mounting type:
Panel mounting
Partie commande/affichage
Lens illumination:
Illuminated
Caractéristiques électriques
Switching voltage and switching current:

250 VAC, 5 A (ohmic)

250 VAC, 3 A (Soldering terminal)

250 VAC, 2 A (inductive, cos(phi) = 0.7)

125 VAC, 3 A (inductive, cos(phi) = 0.7)

220 VDC, 0.1 A (inductive, L:R = 30 ms)

110 VDC, 0.2 A (inductive, L:R = 30 ms)

60 VDC, 0.7 A (inductive, L:R = 30 ms)

24 VDC, 2 A (inductive, L:R = 30 ms)
Contacts:
2 NC / 2 NO
Rated Operational Voltage Ue:
250 VAC/DC according to EN IEC 60947-1
Switching rating:
250 V @ 3 A
Electrical lifetime:
50 000 cycles of operation
Electric strength:
2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
Protection class:
ll
Standards:
According to EN/IEC 61058-1
Thermal current Ith:
The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.
3 A
Caractéristiques mécaniques
Terminal:
Soldering terminal
Contact material:
Gold
Switching action:
Maintained
Switching system:
Snap-action switching element
Switching system:
Self-cleaning, double-break snap action switching system, 1 normally closed and 1 normally open contact per element.
Mechanical lifetime:
1 Mil. cycles of operation (RCC/RPB)
Operating force:
1,8 … 6 N, depending on the number of switching elements
Operating Travel:
3 mm
Tightening torque:
Fixing nut max. 0.5 Nm
Wire cross section:
Snap-action switching element with tinned soldering terminals at the sides
Max. wire diameter 2 wires à 1.2 mm
Max. wire cross-section of stranded cable 1 x 1 mm²
Weight:
0.007 kg
Conditions environnementales
IP front protection:
IP65, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
Vibration resistance:
10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
Climate resistance:
Standard condition, as per DIN EN 60068-2-30
Changing condition, as per DIN EN 60068-2-14
Certificats
Approbations:
CB (IEC 61058-1), CQC, CSA, DNV, EAC, ENEC (EN 61058-1), UL, VDE
Conformities:
CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 30 / EU (EMC), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
Autres
Short Description:
Actuator, Illuminated, 2 NC / 2 NO, Maintained, Soldering terminal, IP65, according to DIN EN 60529
Housing colour:
Black
max. number of switching elements:
4
Wiring diagrams:
Wiring diagrams
Component layouts:
Component layouts
A = Universal terminal (rear side)
B = Plug-in terminal (rear side)
C = Anti twist device
D = Drilling plan
Mounting cut-outs:
Mounting cut-outs
Mounting cut-outs
Mounting cut-outs
Dimension drawings:
Dimension drawings
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Télécharger des fichiers
Ajouter au panier
Consentement aux cookies
Notre site Web utilise des cookies. Pour plus d'information sur les cookies utilisés sur ce site Web, veuillez consulter notre Déclaration de confidentialité et en savoir plus sur nous dans la section Mentions légales. Vous pouvez modifier les paramètres dans la section Déclaration de confidentialité.
Accepter tous
Refuser
Gérer les paramètres