Assembly settings
Montage
Design
Flush
Flush
choisir ...
Mounting type
Panel mounting
Panel mounting
choisir ...
Caractéristiques mécaniques
Terminal
Universal terminal, 2 x 0.5 mm
Universal terminal, 2 x 0.5 mm
choisir ...
Conditions environnementales
IP front protection
IP65, according to DIN EN 60529
IP65, according to DIN EN 60529
choisir ...
Retour
Votre produit:
Montage
- Design:
- Flush
- Mounting type:
- Panel mounting
Caractéristiques électriques
- Switching voltage and switching current:
- 100 mA at 42 VAC/VDC
- Electric strength:
- 2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
Caractéristiques mécaniques
- Terminal:
- Universal terminal, 2 x 0.5 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Terminal details 1:
- The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals.For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in.
- Weight:
- 0.005 kg
Conditions environnementales
- IP front protection:
- IP65, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
Certificats
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
Autres
- Short Description:
- Actuator, Universal terminal, 2 x 0.5 mm, IP65, according to DIN EN 60529
- Housing colour:
- Black
- Wiring diagrams:
- Component layouts:
A = Terminals (rear side)- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
Télécharger des fichiers
Ajouter au panier