Assembly settings
제품 라인업
즉시 이용 가능
아니
no
선택하다 ...
정면
Front form
Square
Square
선택하다 ...
Front bezel colour
Black
Black
선택하다 ...
Front bezel material
Plastic, according to UL 94 V0
Plastic, according to UL 94 V0
선택하다 ...
Front dimension
24 mm x 24 mm
24 mm x 24 mm
선택하다 ...
장착
Design
Flush
Flush
선택하다 ...
Mounting type
Panel mounting
Panel mounting
선택하다 ...
Mounting cut-out
21 mm x 21 mm
21 mm x 21 mm
선택하다 ...
작동/표시 부분
Lens shape
Flush
Flush
선택하다 ...
Lens colour
Colourless
Colourless
선택하다 ...
Lens material
Plastic, according to UL 94 V0
Plastic, according to UL 94 V0
선택하다 ...
Lens illumination
Illuminated
Illuminated
선택하다 ...
Illumination colour
Red
Red
선택하다 ...
전기적 특성
연락처 설정
2 NC + 2 NO
2 NC + 2 NO
선택하다 ...
Switching rating
250 V @ 3 A
250 V @ 3 A
선택하다 ...
Operating voltage kind of
V AC/DC
V AC/DC
선택하다 ...
Operating voltage
12 V
12 V
선택하다 ...
기계적 특성
Terminal
Soldering terminal
Soldering terminal
선택하다 ...
Switching system
Snap-action switching element
Snap-action switching element
선택하다 ...
Contact material
Gold
Gold
선택하다 ...
Switching action
Maintained
Maintained
선택하다 ...
주변 환경
IP front protection
IP65
IP65
선택하다 ...
뒤로
Illuminated push button, Series 51, 24 mm x 24 mm, illuminative, Flush, 2 NC + 2 NO, Gold, IP65, Soldering terminal
- 61-9671.7
- 51-282.0252F
- 61-9930.0
- 10-2J09.1062
- Front form
- Lens illumination
- Lens colour
- Switching rating
- Switching system
- Switching action
- Terminal
- 연락처 설정
- Front dimension
- Front bezel colour
- Mounting cut-out
- Operating voltage kind of
- Illumination colour
- Operating voltage
액세서리 및 도구 추가
귀사의 제품:
제품 라인업
- HMI function:
- Illuminated push button
- 시리즈:
- Series 51
정면
- Front dimension:
- 24 mm x 24 mm
- Front form:
- Square
- Front bezel colour:
- Black
- Front bezel material:
- Plastic, according to UL 94 V0
장착
- Design:
- Flush
- Mounting cut-out:
- 21 mm x 21 mm
- Mounting type:
- Panel mounting
작동/표시 부분
- Lens colour:
- Colourless
- Lens material:
- Plastic, according to UL 94 V0
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
- Illumination colour:
- Red
전기적 특성
- Switching voltage and switching current:
250 VAC, 5 A (ohmic)
250 VAC, 3 A (Soldering terminal)
250 VAC, 2 A (inductive, cos(phi) = 0.7)
125 VAC, 3 A (inductive, cos(phi) = 0.7)
220 VDC, 0.1 A (inductive, L:R = 30 ms)
110 VDC, 0.2 A (inductive, L:R = 30 ms)
60 VDC, 0.7 A (inductive, L:R = 30 ms)
24 VDC, 2 A (inductive, L:R = 30 ms)
- 연락처 설정:
- 2 NC + 2 NO
- Operating voltage:
- 12 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Switching rating:
- 250 V @ 3 A
- Electrical lifetime:
- 50 000 cycles of operation
- Lumi. Intensity:
- 330 mcd
- Thermal current Ith:
- The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.3 A
기계적 특성
- Terminal:
- Soldering terminal
- Contact material:
- Gold
- Switching action:
- Maintained
- Switching system:
- Snap-action switching element
- Tightening torque:
- Fixing nut max. 0.5 Nm
- 총 중량:
- 0.012 kg
주변 환경
- IP front protection:
- IP65
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Vibration resistance:
- 10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
기타
- Housing colour:
- Black
- Product attributes:
- For indicator illuminated pushbutton and keylock switch
- max. number of switching elements:
- 4
- Wiring diagrams:
이 제품을 공유하고 저장하세요
파일 다운로드
장바구니에 담기
귀사의 제품은 다음과 같이 구성됩니다 4 COMPONENTS:
정면
- Front form:
- Square
작동/표시 부분
- Lens colour:
- Colourless
- Lens material:
- Plastic, according to UL 94 V0
- Lens illumination:
- Illuminated
- Lens shape:
- Flush
- Lens optics:
- transparent
기계적 특성
- Weight:
- 0.002 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Lens, 18 mm x 18 mm, Illuminated, Colourless, Flush, Plastic, according to UL 94 V0
- Dimension:
- 18 mm x 18 mm
파일 다운로드
어디서 구입할 수 있나요?
장바구니에 담기
장착
- Design:
- Flush
- Mounting type:
- Panel mounting
작동/표시 부분
- Lens illumination:
- Illuminated
전기적 특성
- Switching voltage and switching current:
250 VAC, 5 A (ohmic)
250 VAC, 3 A (Soldering terminal)
250 VAC, 2 A (inductive, cos(phi) = 0.7)
125 VAC, 3 A (inductive, cos(phi) = 0.7)
220 VDC, 0.1 A (inductive, L:R = 30 ms)
110 VDC, 0.2 A (inductive, L:R = 30 ms)
60 VDC, 0.7 A (inductive, L:R = 30 ms)
24 VDC, 2 A (inductive, L:R = 30 ms)
- Contacts:
- 2 NC / 2 NO
- Rated Operational Voltage Ue:
- 250 VAC/DC according to EN IEC 60947-1
- Switching rating:
- 250 V @ 3 A
- Electrical lifetime:
- 50 000 cycles of operation
- Electric strength:
- 2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
- Protection class:
- ll
- Standards:
- According to EN/IEC 61058-1
- Thermal current Ith:
- The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values.3 A
기계적 특성
- Terminal:
- Soldering terminal
- Contact material:
- Gold
- Switching action:
- Maintained
- Switching system:
- Snap-action switching element
- Switching system:
- Self-cleaning, double-break snap action switching system, 1 normally closed and 1 normally open contact per element.
- Mechanical lifetime:
- 1 Mil. cycles of operation (RCC/RPB)
- Operating force:
- 1,8 … 6 N, depending on the number of switching elements
- Operating Travel:
- 3 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Wire cross section:
- Snap-action switching element with tinned soldering terminals at the sidesMax. wire diameter 2 wires à 1.2 mmMax. wire cross-section of stranded cable 1 x 1 mm²
- Weight:
- 0.007 kg
주변 환경
- IP front protection:
- IP65, according to DIN EN 60529
- Operating temperature:
- – 25 °C … + 55 °C, mounted as a block, make sure the heat can escape freely
- Storage temperature:
- – 40 °C … + 85 °C
- Shock resistance:
- 15 g for 11 ms, as per DIN / EN 60512-4-3, DIN / EN 60068-2-27 (Single impacts, semi-sinusoidal)
- Vibration resistance:
- 10 g at 10 Hz…1500 Hz, amplitude 0.75 mm (Sinusoidal), according to DIN EN 60512-4-4, DIN EN 60068-2-6
- Climate resistance:
- Standard condition, as per DIN EN 60068-2-30Changing condition, as per DIN EN 60068-2-14
증명서
- Approbations:
- CB (IEC 61058-1), CQC, CSA, DNV, EAC, ENEC (EN 61058-1), UL, VDE
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 30 / EU (EMC), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Actuator, Illuminated, 2 NC / 2 NO, Maintained, Soldering terminal, IP65, according to DIN EN 60529
- Housing colour:
- Black
- max. number of switching elements:
- 4
- Wiring diagrams:
- Component layouts:
A = Universal terminal (rear side)
B = Plug-in terminal (rear side)
C = Anti twist device
D = Drilling plan- Mounting cut-outs:
- Dimension drawings:
A = Solder terminal
B = Plug-in terminal 2.8 mm x 0.5 mm
C = Universal terminal 2.0 mm x 0.5 mm
파일 다운로드
어디서 구입할 수 있나요?
장바구니에 담기
정면
- Front dimension:
- 24 mm x 24 mm
- Front form:
- Square
- Front bezel colour:
- Black
- Front bezel material:
- Plastic, according to UL 94 V0
장착
- Mounting cut-out:
- 21 mm x 21 mm
- Mounting type:
- Panel mounting
기계적 특성
- Weight:
- 0.003 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Front bezel set, 24 mm x 24 mm, 18 mm x 18 mm, Black, Plastic, according to UL 94 V0
- Dimension:
- 24 mm x 24 mm
- Internal size:
- 18 mm x 18 mm
- Product attributes:
- For indicator illuminated pushbutton and keylock switch
- Mounting cut-outs:
파일 다운로드
어디서 구입할 수 있나요?
장바구니에 담기
작동/표시 부분
- Illumination colour:
- Red
전기적 특성
- Operating voltage:
- 12 V AC/DC +10%
- Operation current:
- 7 - 14 mA ±15 %
- Lumi. Intensity:
- 330 mcd
기계적 특성
- Weight:
- 0.003 kg
증명서
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Single-LED, T1 ¾ MG, Red, 12 V AC/DC +10%
- Kind of iIllumination:
- Single-LED
- Hints:
- Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)When using AC/DC types with AC operation, slight flickering can occurThe luminous intensity stated is for when used with DCElectrical and optical data are measured at 25 °CThe specified versions are built with a protection diode (halve wave rectifier) in series and the LEDLuminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LEDWhere supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.Keep to the country specific safety instructions
- Wiring diagrams:
- Dimension drawings:
파일 다운로드
어디서 구입할 수 있나요?
장바구니에 담기