2500 VAC, 50 Hz, 1 min. between all terminals and earth, according to IEC 61058-1, part 15
Protection class:
ll
Thermal current Ith:
5 A, according to EN / IEC 60947-5-1
기계적 특성
Terminal:
Plug-in terminal, 2.8 x 0.5 mm
Contact material:
Gold
Switching action:
Maintained - Rest - Momentary
Switching system:
Snap-action switching element
Switching system:
Self-cleaning, double-break snap action switching system, 2 normally closed and 2 normally open contact per element.
Switching positions:
3 positions
Switching angle:
90° left / 42° right
Mechanical lifetime:
100 000 cycles of operation
Tightening torque:
Fixing nut max. 0.5 Nm
Wire cross section:
Max. wire cross-section 2 wires with 1 mm
Max. wire cross-section of stranded cable 2 x 0.75 mm²
Weight:
0.011 kg
주변 환경
IP front protection:
IP65, according to DIN EN 60529
Operating temperature:
– 25 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
증명서
Approbations:
CB (IEC 61058-1), CQC, CSA, DNV, ENEC (EN 61058-1), UL
Conformities:
CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 30 / EU (EMC), 2014 / 35 / EU (LVD)
REACH:
REACH compliant
RoHS:
RoHS compliant
기타
Short Description:
Actuator, Ø 18 mm, optional illuminative, short, Round, 2 NC / 2 NO, Maintained - Rest - Momentary, Plug-in terminal, 2.8 x 0.5 mm, IP65, according to DIN EN 60529
Due to high surface temperatures, the series resistor must not be soldered directly to the terminals of the equipment (use a terminal plate)
When using AC/DC types with AC operation, slight flickering can occur
The luminous intensity stated is for when used with DC
Electrical and optical data are measured at 25 °C
The specified versions are built with a protection diode (halve wave rectifier) in series and the LED
Luminosity and wave length variations caused by LED manufacturing processes may cause slight differences regarding the illumination. The customer has to decide what resistor shall be used to the LED
Where supply voltages are over 48 V, a voltage-reduction element (external protective series resistor) must be used.