Assembly settings
제품 라인업
즉시 이용 가능
네
yes
선택하다 ...
정면
Front form
Rectangular
Rectangular
선택하다 ...
Front bezel colour
Black
Black
선택하다 ...
Front bezel material
Plastic
Plastic
선택하다 ...
Front dimension
24 mm x 18 mm
24 mm x 18 mm
선택하다 ...
장착
Design
Raised
Raised
선택하다 ...
Mounting type
Panel mounting
Panel mounting
선택하다 ...
Mounting cut-out
Ø 16 mm
Ø 16 mm
선택하다 ...
기계적 특성
Terminal
Plug-in terminal, 2.8 x 0.5 mm
Plug-in terminal, 2.8 x 0.5 mm
선택하다 ...
주변 환경
IP front protection
IP40
IP40
선택하다 ...
뒤로
Buzzer, Series 51, 24 mm x 18 mm, Raised, Plug-in terminal, 2.8 x 0.5 mm
- 51-801.002
- Terminal
액세서리 및 도구 추가
귀사의 제품:
제품 라인업
- HMI function:
- Buzzer
- 시리즈:
- Series 51
정면
- Front dimension:
- 24 mm x 18 mm
- Front form:
- Rectangular
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
장착
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
기계적 특성
- Terminal:
- Plug-in terminal, 2.8 x 0.5 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- 총 중량:
- 0.009 kg
음향 특성
- Tone frequency:
- 2.1 kHz
- Sound pressure:
- 88dB (A) ±8dB at a distance of 0.1m
주변 환경
- IP front protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
기타
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- Further information see Technical data
- Wiring diagrams:
Recommended Protection Circuit: If the buzzer is not indirectly protected against surge impulses by an EMC-compliant power supply or if the cable length exceeds 30 m, additional protection measures are recommended. In this case, a bidirectional TVS diode should be installed between the connection wires as close to the buzzer as possible, as shown in the schematic above. To suppress conducted emissions, a ceramic capacitor of 3.3 µF / 50 V should additionally be connected at the buzzer terminals [a] and [b].
A = Continuous tone
B = Interval tone 2Hz
이 제품을 공유하고 저장하세요
파일 다운로드
장바구니에 담기
귀사의 제품은 다음과 같이 구성됩니다 1 COMPONENTS:
정면
- Front dimension:
- 24 mm x 18 mm
- Front form:
- Rectangular
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
장착
- Design:
- Raised
- Mounting cut-out:
- Ø 16 mm
- Mounting type:
- Panel mounting
전기적 특성
- Operating Voltage and Current:
Typ. 10 VDC ... 26 VDC, ≤ 20mA
기계적 특성
- Terminal:
- Plug-in terminal, 2.8 x 0.5 mm
- Tightening torque:
- Fixing nut max. 0.5 Nm
- Weight:
- 0.009 kg
음향 특성
- Tone frequency:
- 2.1 kHz
- Sound pressure:
- 88dB (A) ±8dB at a distance of 0.1m
주변 환경
- IP Protection:
- IP40
- Operating temperature:
- – 25 °C … + 55 °C
- Storage temperature:
- – 40 °C … + 85 °C
증명서
- Approbations:
- DNV
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS), 2014 / 35 / EU (LVD)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Actuator, Ø 16 mm, 24 mm x 18 mm, Rectangular, Black, Plastic, Plug-in terminal, 2.8 x 0.5 mm
- Housing colour:
- Black
- Housing material:
- Plastic
- Product attributes:
- Further information see Technical data
- Buzzer system:
- Electronic non-contacting buzzer with IC oscillator
- Wiring diagrams:
- Recommended Protection Circuit: If the buzzer is not indirectly protected against surge impulses by an EMC-compliant power supply or if the cable length exceeds 30 m, additional protection measures are recommended. In this case, a bidirectional TVS diode should be installed between the connection wires as close to the buzzer as possible, as shown in the schematic above. To suppress conducted emissions, a ceramic capacitor of 3.3 µF / 50 V should additionally be connected at the buzzer terminals [a] and [b].A = Continuous tone
B = Interval tone 2Hz - Mounting cut-outs:
- Dimension drawings:
파일 다운로드
어디서 구입할 수 있나요?
장바구니에 담기