Assembly settings
정면
Front form
Round
Round
선택하다 ...
Front bezel colour
Black
Black
선택하다 ...
Front bezel material
Plastic
Plastic
선택하다 ...
Front dimension
Ø 25 mm
Ø 25 mm
선택하다 ...
장착
Design
Flush
Flush
선택하다 ...
Mounting type
Panel mounting
Panel mounting
선택하다 ...
Mounting cut-out
Ø 22 mm
Ø 22 mm
선택하다 ...
작동/표시 부분
Lens illumination
Illuminated
Illuminated
선택하다 ...
기계적 특성
Switching system
Short-travel element
Short-travel element
선택하다 ...
Switching action
Momentary
Momentary
선택하다 ...
주변 환경
IP front protection
IP65, IP67
IP65, IP67
선택하다 ...
뒤로
귀사의 제품:
정면
- Front dimension:
- Ø 25 mm
- Front form:
- Round
- Front bezel colour:
- Black
- Front bezel material:
- Plastic
장착
- Design:
- Flush
- Mounting cut-out:
- Ø 22.5 mm
- Mounting type:
- Panel mounting
작동/표시 부분
- Lens illumination:
- Illuminated
기계적 특성
- Switching action:
- Momentary
- Switching system:
- Short-travel element
- Mechanical lifetime:
- ≥1 Mil. cycles of operation
- Operating force:
- 4.5 N ±1 N (measured at the lens)
- Operating Travel:
- 1.2 mm
- Tightening torque:
- Fixing nut 0.8 Nm
- Weight:
- 0.007 kg
주변 환경
- IP front protection:
- IP65, IP67
- IP Protection:
- IP65, IP67
- Operating temperature:
- – 25 °C … + 70 °C
- Storage temperature:
- – 40 °C … + 85 °C
- Climate resistance:
- Damp heat, cyclic: 96 hours, + 25 °C/97 %, + 55 °C/93 % relative humidity, as per EN IEC 60068-2-30Damp heat, steady: 56 days, + 40 °C/93 % relative humidity, according to EN IEC 60068-2-78Rapid change of temperature: 100 cycles, – 40 °C … + 80 °C, as per EN / IEC 60068-2-14
증명서
- Approbations:
- EBC (TSI PRM), NFF
- Conformities:
- CE, UKCA, 2011 / 65 / EC (RoHS)
- REACH:
- REACH compliant
- RoHS:
- RoHS compliant
기타
- Short Description:
- Actuator, Ø 22.5 mm, Ø 25 mm, Illuminated, Round, Black, Plastic, Momentary, IP65, IP67
- Dimension:
- Ø 25 mm
- Housing colour:
- Black
- Housing material:
- Plastic
- Description component:
- Material housing actuator: Plastic as per UL94 V0
- Wiring diagrams:
- Mounting cut-outs:
- Dimension drawings:
A = Plug-in terminal 2.8 mm x 0.8 mm
B = Flat ribbon cable
D = Lens level with bezel
E = Lens raised above bezel
H = Mushroom-head cap
A = Plug-in terminal 2.8 mm x 0.5 mm
B = Flat ribbon cable
D = Lens level with bezel
E = Lens raised above bezel
F = Lens konvexe level with bezel
G =Lens convexe raised above bezel
H = Mushroom-head cap
A = Lens level with bezel
E = Lens raised above bezel
H = Mushroom-head cap
D = Lens level with bezel
E = Lens raised above bezel
F = Lens konvexe level with bezel
G = Lens convexe raised above bezel
H = Mushroom-head cap
파일 다운로드
장바구니에 담기