제품 내 구성 요소 보기
Assembly settings
전기적 특성
Contacts
1 NC / 1 FS

1 NC / 1 FS

선택하다 ...
  • 1 C
  • 1 NC
  • 1 NC / 1 FS
  • 1 NC / 1 MC
  • 1 NC / 1 NO
  • 1 NC / 2 NO
  • 1 NO
  • 2 C
  • 2 NC
  • 2 NC / 1 NO
  • 2 NC / 2 NO
  • 2 NO
  • 3 NC
  • 3 NC / 3 NO
  • 3 NO
  • 4 NC / 4 NO
Switching rating
500 V AC @ 10 A

500 V AC @ 10 A

선택하다 ...
  • 150 V AC/DC @ 3 A
  • 150 V AC/DC @ 5 A
  • 24 V DC @ 0,2 A
  • 240 V
  • 240 V @ 3 A
  • 240 V AC @ 3 A
  • 250 V
  • 250 V @ 10 A
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 250 V AC @ 1,5 A
  • 250 V AC @ 3 A
  • 250 V AC @ 6 A
  • 250 V AC/DC
  • 250 V AC/DC @ 5 A
  • 30 V DC @ 0,1 A
  • 35 V @ 3 A
  • 35 V AC/DC @ 0,5 A
  • 35 V AC/DC @ 0,6 A
  • 36 V AC/DC @ 0,6 A
  • 400 V @ 10 A
  • 42 V
  • 42 V @ 0,1 A
  • 42 V AC @ 0,1 A
  • 42 V AC/DC @ 0,1 A
  • 42 V DC @ 0,1 A
  • 440 V AC @ 10 A
  • 48 V DC @ 0,5 A
  • 5 A
  • 50 V @ 0,1 A
  • 50 V @ 0,8 A
  • 50 V AC/DC @ 0,2 A
  • 50 V AC/DC @ 0,3 A
  • 500 V @ 10 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
  • 600 V AC @ 1,2 A
기계적 특성
Terminal
Plug-in terminal, 6.3 x 0.8 mm

Plug-in terminal, 6.3 x 0.8 mm

선택하다 ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Deutsch DT04-6P
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • TE 8P-1745000-3
  • TE DEUTSCH
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
  • Würth Elektronik WR-MPC3, 16 Pins
  • Würth Elektronik WR-MPC3, 20 Pins
Switching system
Slow-make switching element

Slow-make switching element

선택하다 ...
  • Capacitive
  • Low-level element
  • Short-travel element
  • Slow-make switching element
  • Snap-action switching element
Contact material
Silver

Silver

선택하다 ...
  • Gold
  • Gold-plated silver
  • Palladium
  • Rhodium/Silver
  • Silver
뒤로
상세 제품 개요 보기
https://www.eao.com/component/704.915.4FS-1/k...

Switching element - New Version

  • 704.915.4FS-1

704.915.4FS-1 Switching element - New Version, Slow-make switching element, 500 V AC @ 10 A, Silver, 1 NC / 1 FS, Plug-in terminal, 6.3 x 0.8 mm
704.915.4FS-1
장바구니에 담기
귀사의 제품:
704.915.4FS-1

704.915.4FS-1

Switching element - New Version

전기적 특성
Contacts:
1 NC / 1 FS
Rated impulse withstand voltage Uimp:
4 kV
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

110 VDC

Current

5 mA

2 mA

Hard silver contacts

Voltage

24 VDC

110 VDC

Current

50 mA

10 mA
Switching rating:
500 V AC @ 10 A
Electrical lifetime:
50 000 cycles of operation (500 VAC, 10 A)
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” DIN EN IEC UL 60947-5-1
Thermal current Ith:
Max. current as per EN IEC 60947-5-1 10 A
기계적 특성
Terminal:
Plug-in terminal, 6.3 x 0.8 mm
Contact material:
Silver
Switching system:
Slow-make switching element
Switching system:
The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Wire cross section:
Plug-in terminal 1 x 6.3 mm x 0.8 mm or 2 x 2.8 mm x 0.8 mm
For switches with plug-in terminals it is necessary to provide insulation sleeves and to maintain a spacing of 65 mm between rows (mounting cut-outs).
Weight:
0.022 kg
주변 환경
IP Protection:
IP00
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
(single impacts, semi-sinusoidal) 300 m/s², pulse width 18 ms, as per DIN EN 60068-2-27
Vibration resistance:
(sinusförmig) 100 m/s² bei 10 Hz…500 Hz, nach DIN EN 60068-2-6, Erhöhtes Breitbandrauschen nach DIN EN 61373, Klasse 1B
Climate resistance:
Relative humidity 10 %rh ... 95 %rh (non-condensing) original packaging according to DIN EN IEC 60721-3-1 Class 1C1
증명서
Approbations:
CB (IEC 60947-5-1), cULus, DNV, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
기타
Short Description:
Switching element - New Version, Slow-make switching element, 500 V AC @ 10 A, Silver, 1 NC / 1 FS, Plug-in terminal, 6.3 x 0.8 mm
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
A suitable enclosure is required for applications with increased protection requirements. In North America, the product must be installed in an enclosure in accordance with UL 50E Type 2 or higher.
Special requirements:

Special requirements for positive-opening auxiliary current switches

Positive opening travel

Emergency stop 12.5 mm

Minimum force

Emergency stop 50 N (actuating force at

which is safely switched)

Max. travel

Emergency stop 12.5 mm
Wiring diagrams:
Wiring diagrams
A = mounted, not actuated
B = mounted, actuated
C = not mounted, not actuated
Dimension drawings:
Dimension drawings
파일 다운로드
장바구니에 담기
쿠키 동의
본 웹사이트는 쿠키를 사용합니다. 본 웹사이트의 쿠키에 대한 자세한 내용은 개인정보 처리방침을 참조하시고, 저희에 대한 자세한 내용은 법적 고지에서 확인하실 수 있습니다. 설정은 개인정보 처리방침에서 변경하실 수 있습니다.
모두 수락
필수 항목이 아닌 항목은 거부
설정 관리