Assembly settings
Caratteristiche elettriche
Contacts
1 NC / 1 NO

1 NC / 1 NO

scegliere ...
  • 1 C
  • 1 NC
  • 1 NC / 1 FS
  • 1 NC / 1 MC
  • 1 NC / 1 NO
  • 1 NC / 2 NO
  • 1 NO
  • 2 C
  • 2 NC
  • 2 NC / 1 NO
  • 2 NC / 2 NO
  • 2 NO
  • 3 NC
  • 3 NC / 3 NO
  • 3 NO
  • 4 NC / 4 NO
Switching rating
500 V @ 10 A

500 V @ 10 A

scegliere ...
  • 150 V AC/DC @ 3 A
  • 150 V AC/DC @ 5 A
  • 24 V DC @ 0,2 A
  • 240 V
  • 240 V @ 3 A
  • 240 V AC @ 3 A
  • 250 V
  • 250 V @ 10 A
  • 250 V @ 3 A
  • 250 V @ 5 A
  • 250 V AC @ 1,5 A
  • 250 V AC @ 3 A
  • 250 V AC @ 6 A
  • 250 V AC/DC
  • 250 V AC/DC @ 5 A
  • 30 V DC @ 0,1 A
  • 35 V @ 3 A
  • 35 V AC/DC @ 0,5 A
  • 35 V AC/DC @ 0,6 A
  • 36 V AC/DC @ 0,6 A
  • 400 V @ 10 A
  • 42 V
  • 42 V @ 0,1 A
  • 42 V AC @ 0,1 A
  • 42 V AC/DC @ 0,1 A
  • 42 V DC @ 0,1 A
  • 440 V AC @ 10 A
  • 48 V DC @ 0,5 A
  • 5 A
  • 50 V @ 0,1 A
  • 50 V @ 0,8 A
  • 50 V AC/DC @ 0,2 A
  • 50 V AC/DC @ 0,3 A
  • 500 V @ 10 A
  • 500 V AC @ 10 A
  • 500 V AC @ 6 A
  • 600 V AC @ 1,2 A
Caratteristiche meccaniche
Terminal
Screw terminal

Screw terminal

scegliere ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Deutsch DT04-6P
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • TE 8P-1745000-3
  • TE DEUTSCH
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
  • Würth Elektronik WR-MPC3, 16 Pins
  • Würth Elektronik WR-MPC3, 20 Pins
Switching system
Slow-make switching element

Slow-make switching element

scegliere ...
  • Capacitive
  • Low-level element
  • Short-travel element
  • Slow-make switching element
  • Snap-action switching element
Contact material
Silver

Silver

scegliere ...
  • Gold
  • Gold-plated silver
  • Palladium
  • Rhodium/Silver
  • Silver
Indietro
Mostra una panoramica dettagliata del prodotto
https://www.eao.com/component/704.910.5B/it/s...

Switching element

  • 704.910.5B

704.910.5B Switching element, Slow-make switching element, 500 V @ 10 A, Silver, 1 NC / 1 NO, Screw terminal
704.910.5B
Aggiungi al carrello
Il vostro prodotto:
704.910.5B

704.910.5B

Switching element

Caratteristiche elettriche
Switching voltage and switching current:

as per DIN EN IEC 60947-5-1

voltage

DC13

AC15

24 V

4.0 A

8.0 A

60 V

1.5 A

8.0 A

110 V

1.0 A

120 V

8.0 A

230 V

0.4 A

7.0 A

400 V

0.2 A

5.0 A

500 V

0.15 A

4.0 A

as per UL 60947-5-1

voltage

power

24 VDC

4.0 A, Pilot duty

60 VDC

1.5 A, Pilot duty

120 VDC

1.0 A, Pilot duty

240 VDC

0.4 A, Pilot duty

415 VDC

0.2 A, Pilot duty

480 VDC

0.14A, Pilot duty

120 VAC

8.0 A, Pilot duty

240 VAC

7.0 A, Pilot duty

415 VAC

5.0 A, Pilot duty

480 VAC

4.0 A, Pilot duty

For voltages greater than Ue = 400 V,

the grid dimensions must not be

less than 35 mm x 50 mm.
Contacts:
1 NC / 1 NO
Forward voltage:
Rated impulse withstand voltage Uimp:
4 kV, according to EN/IEC 60947-5-1
Rated insulation voltage Ui:
500 V
Recommended minimum operational data:

Gold-silver contacts

Voltage

24 VDC

110 VDC

Current

5 mA

2 mA

Hard silver contacts

Voltage

24 VDC

110 VDC

Current

50 mA

10 mA
Switching rating:
500 V @ 10 A
Electrical lifetime:
50 000 cycles of operation
Pollution degree:
3
Standards:
The switches comply with the “Standards for low-voltage switching devices” EN IEC 60947-5-1
Thermal current Ith:
10 A Max. permissible current for continuous operation and ambient temperatures not exceeding the specified max. values.
Caratteristiche meccaniche
Terminal:
Screw terminal
Contact material:
Silver
Switching system:
Slow-make switching element
Switching system:
The double-break, slow-make switching element is equipped with one or two independent contact systems, acting as normally open or normally closed contact. The normally closed contact has forced opening.
Slow-make contacts with forced action are ideal for high switch ratings.
Operating force:
1 Normally closed approx. 2 N, 1 Normally open approx. 3 N
Tightening torque:
Screw terminal 0.5 Nm
Wire cross section:
Max. wire cross-section 2 mm x 2.5 mm²
Skinning wire 10 mm
Max. wire cross-section of stranded cable 2 x 1.5 mm²
use stranded wires only with wire end ferrules of 10 mm length
Only one polarity is allowed on each side when wiring.
Weight:
0.016 kg
Condizioni ambientali
IP Protection:
IP00
Operating temperature:
– 40 °C … + 55 °C
Storage temperature:
– 40 °C … + 85 °C
Shock resistance:
300 m/s², pulse width 11 ms, 3-axis, (single impacts, semi-sinusoidal as per DIN EN 60068-2-27)
Vibration resistance:
100 m/s² at 10 Hz … 500 Hz, amplitude 0.75 mm, (sinusoidal according to DIN EN 60068-2-6)
Climate resistance:
Relative humidity, max. 95%, non-condensing
Certificati
Approbations:
CB (IEC 60947-5-1), cULus, DNV, EAC, NFF, VDE
Conformities:
CE, CCC, UKCA
REACH:
REACH compliant
RoHS:
RoHS compliant
Di più
Short Description:
Switching element, Slow-make switching element, 500 V @ 10 A, Silver, 1 NC / 1 NO, Screw terminal
Hints:
When using the switching element, the application guidelines must be observed.
For the third switching element the terminal marking insert is to be ordered separately
Operating temperature: Other temperatures on request
Special requirements:

Special requirements for positive-opening auxiliary current switches

Positive opening travel

Emergency stop 12.5 mm

Minimum force

Emergency stop 50 N (actuating force at

which is safely switched)

Max. travel

Emergency stop 12.5 mm
Wiring diagrams:
Wiring diagrams
Dimension drawings:
Dimension drawings
Scarica i file
Aggiungi al carrello
Informazioni sui Cookie
Il nostro sito web utilizza i cookie. Per ulteriori informazioni sui cookie utilizzati in questo sito web, consultare la nostra Informativa sulla Privacy e per saperne di più su di noi, consultare la Informazioni Corporate. È possibile modificare le impostazioni nella Informativa sulla Privacy.
Accetta tutti i cookie
Nega tutti i cookie
Gestisci impostazioni