카탈로그 보기
Assembly settings
기계적 특성
Terminal
PCB terminal

PCB terminal

선택하다 ...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
기타
Titel Accessory
PCB plug-in base

PCB plug-in base

선택하다 ...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Connecting piece for enclosures
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Electronic module
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Plug-in cable for 16 mm
  • Plug-in cable for 19 and 22 mm
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spacer ring
  • Spare key
  • Spare key (key blank)
  • Terminal cover
  • Terminal marking - New Version
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Tool set
  • Wall mounting kit
  • Wall-mounting bracket
뒤로
상세 제품 개요 보기
https://www.eao.com/component/61-9823/ko/pcb-...

PCB plug-in base

  • 61-9823

61-9823 PCB plug-in base, PCB terminal, Axial
61-9823
장바구니에 담기
귀사의 제품:
61-9823

61-9823

PCB plug-in base

기계적 특성
Terminal:
PCB terminal
Weight:
0.002 kg
기타
Short Description:
PCB plug-in base, PCB terminal, Axial
Titel Accessory:
PCB plug-in base
Product attributes:
For slow-make switching element
Pins:
Axial
Component layouts:
Component layouts
A = PCB plug-in base
B = Terminals (rear side)
C = Drilling plan (component side)
D= Occupancy plan (component side)
E = Anti-rotation device
F = Positioning hole
Dimension drawings:
Dimension drawings
For Part No. 61-9823
파일 다운로드
장바구니에 담기
쿠키 동의
본 웹사이트는 쿠키를 사용합니다. 본 웹사이트의 쿠키에 대한 자세한 내용은 개인정보 처리방침을 참조하시고, 저희에 대한 자세한 내용은 법적 고지에서 확인하실 수 있습니다. 설정은 개인정보 처리방침에서 변경하실 수 있습니다.
모두 수락
필수 항목이 아닌 항목은 거부
설정 관리